Guangzhou Lightsource Electronics H3A Smart Door Lock User Manual

: June 8, 2024
: Guangzhou Lightsource Electronics

Smart Door Lock

User Manual

H3A

Guangzhou Lightsource Electronics H3A Smart Door Lock

Special Attention:

Mechanical keys please keep outdoor, just in case keys lock in doors.
Please replace for the battery when low wattage alarm.
Reading this manual carefully before installation, and keep it for future reference.

1. Introduction

1.1.Lock structure

Privacy button

1.2.Packing List

Check the following drawing to check whether the package contains all the parts

NO

| Name| Qty
---|---|---
1| Front Panel|

1

2

| Back Panel| 1
3| Mortise|

1

4

| Card| 3
5| Mechanical Key|

2

6

| Waterproof Rubber Plate| 2
7| Screw Stubs:M4*30mm|

3

8

| Screw Stubs:M4*35mm| 3
9| Strike&Strike Box|

1+1

10

| User Manual| 1
11| Mortise Screws:M4*20mm
(For Wooden Door)|

5

12

| Mortise Screws:M5*10mm
(For Aluminum Door)| 4
13| 60mm Square shaft|

1

14

| 80mm Square shaft| 1
15| M5*25mm Screw|

3

16

| M530mm Screw| 3
17| M540mm Screw|

3

18

| U-Clip| 1
19| M4*8mm Panel screws|

3

1.3.Specifications

Suitable for Models

| H3A| Doors Applicable| Aluminum door
Wooden door
---|---|---|---
Materials| Panel: Stainless steel
Handle: Aluminum alloy| Working Voltage| 6V/4x AA Batteries

Lock Weight

Color

1.4.System Initialization

Open the cover plate of the front panel ,long press the “Reset” button on the back panel for 5s, press “000#”,and the initialization is complete

Reset button

1.5.Electronic Locking Button

Locked Unlocked

If you want to have the Electronic Locking function, first turn on “privacy lock” on the app
When the button is in the red state, it is in the locked state and can only be unlocked through the administrator app or mechanical key.

2.Installation

2.1Turn the handle

Notice: Adjust the handle according to the direction you open the door.

For Front Panel:

1. Loosen the screws

2. Left Open the Handle Toward the Left;
Right Open the Handle Toward the Right.

3. Reinstall the Screw After Adjusting the Direction

For Back Panel:

1. Loosen the screws

2. Left Open the Handle Toward the Right;
Right Open the Handle Toward the Left.

3. Reinstall the Screw After Adjusting the Direction

2.2. Installation Diagram(For Latch)

Step 1 Install Mortise	Step 2 Install Sliding Screw Casing

The screw casing place is adjustable Depending on the location of the hole-drilling or the old door hole.
Or you could leave it out
Insert the U-clip into the hole and bend it’s front end to fix the square shaft

Step 3 Install back gasket| Step 4 Install Back Panel and link wire
H3A - Latch Installation 3 |
Step 5 Install battery and back cover| Step 6 installation complete
|

3.Operation

3.1.Registration

The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play, Yingyongbao, Baidu, Ali, 360, Huawei, and Xiaomi.

3.2. Connect lock to the phone

please scan the QR code to download the app
You can also search for TTLock in the APP store(Google Play)to download
Register a new account (phone number or email) or login with an existing account.
Touch the lock screen to light, click “+ Add Lock”
The lock nearby will appear on the phone screen, Click “+”
Re-name the lock
The lock added successfully

TTlock users can register the account by mobile phone and Email which currently support 200 countries and regions on the world. The verification code will be sent to user’s mobile phone or email, and the registration will be successful after the verification.

3.3.Add locks

TTLock supports multiple types of lock devices. The lock needs to be added by the app after entering the add mode. Generally, a lock that has not been added, as long as the lock keyboard is touched, it will enter the add mode. The default password is 123456 if not added by the phone

3.4.User Management

3.4.1. Bluetooth management

Make sure there is no problem with Bluetooth communication. After connecting the phone to the door lock as above, Click “ ” to unlock.(the phone is within 5meters from the door lock)

3.4.2. Setting Passcode

Passcodes are also a way to unlock. After entering the passcode on the locked keyboard, press the unlock button in the lower right corner to unlock. Passcodes are divided into permanent, time-limited, single, clear, cycle, and custom.(You can share the Passcode to other user via WeChat, SMS, Email, Messenger, WhatsApp)

3.4.3. Send e-Key

Click on the “ ” as shown in figure, you can send the eKey to other users of TTlock to authorize the unlock(the receiver must be download the APP and set up an account)→ Select e-key format (Timed, permanent, One-time, Recurring) → Enter recipient’s account of TTlock,set the name and effective time of the eKey, Can choose to allow remote unlocking or disallowing, authorized administrator or not authorized, as shown in figure →Send→The recipient’s account has Bluetooth unlock permission

3.4.4.Add card

Supports opening doors through various IC cards. Before an IC card is used to open the door, it needs to be added first. The adding process needs to be perform ed by the app beside the lock.The validity period of the IC can be set, it can be permanent, or it can be limited in time.

3.4.5. Add fingerprint

The premise that a fingerprint can be used to open a door is that it needs to be added first. The adding process needs to be performed by the APP beside the lock. The fingerprint expiration data can be set, it can be permanent, or it can be limited. After setting ,you can modify its validity period.

3.4.6. e-Key management

Click “ ” The manager can delete ekey, reset ekey, send and adjust the ekey, meanwhile he can search the lock record.

3.4.7. Passcode management

Click “ “. All generated passwords can be viewed and managed in the password management module. This includes a password change, password deletion, password reset, and password unlock record.

3.4.8.Unlock records

Click “ ” you can query your unlock record as shown in figure

3.5. Gateway management(Optional)

The TT lock is directly connected via Bluetooth, that is why it is not attacked by the network. The gateway is a bridge between smart locks and home WIFI networks. Through the gateway, the user can remotely view and calibrate the lock clock, read the unlock record. Meanwhile, it can remotely delete and modify the password.

3.5.1. Add Gateway

Light Status

When the gateway is powered on:

Light flashes alternately in red and blue: Stand-by mode, ready for pairing

Blue light: Working mode

Red light: Network failure

Pair the Gateway with APP

(1) Activate the APP

(2) Press “ “

(3) Select [ Gateway ]

(4) Select [ G2 ]

(5) Plug in the gateway and power it on, while the light flashes alternately in red and blue

(6) Press “ + ” sign

(7) Add Gateway

(8) Select the network and fill in the password

(9) Add complete

Notice: If times out, please power off and try it again.

3.5.2. Manual

After a short period of time, you can see which locks are in their coverage in the app. Once the lock is bound to the gateway, the lock can be managed through the gateway

4.FAQ

1) How to read operation records?

In the Records of the main interface. .

2) Why can’t I unlock it after open the passage mode

You need to perform an unlock verification in any method, than the passage mode will take effect.

3) What is the purpose of Auto Lock

You can set how long to lock after unlocking

4) After installation, touch sensing keyboard, screen no respond

a) In this case, first check that the positive and negative electrodes of the battery have been installed upside down, whether the battery has enough power
b) Remove the back panel and see if it’s connected.
c) To eliminate the above situation, you need to remove the lock, check whether the wires of the lock body are squeezed, and the re-wire.

5) Unable to register fingerprint

Check the fingers for dirt or wear, check the fingerprint head on the lock for dirt and oil stains, etc.
Check to see if the fingerprint is working properly(Press to see if there is any responds.

6) What is the reason why the smart lock consumes fast power?

a) Large standby power consumption
b) Short circuit

7) There is no response to pressing the handle on outside the door, and there is unlock normally on inside the door, but the verification is normal, and the motor is normal.

It may be the triangle direction on the clutch was error, please check correction.

8) How many times will the password be locked? How long is it locked?

Enter the wrong password more than 5 times in a row, the keyboard is locked for 5 minus, Other ways to can open the door

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Guarantee

Customer Name: __
Customer Calls:
Purchase Date: ____
Product Name:
Product Model: ___

Note:
(1) Please keep this card so that you can use it when you need warranty service.
(2) We provide you with a one-year warranty from the date of purchase.
(3) This warranty service is valid for customers in any country in the world.