Shenzhenshi Weimiaoyin Technology XT-3 True Wireless Earphone User Manual
- June 6, 2024
- Shenzhenshi Weimiaoyin Technology
Table of Contents
Shenzhenshi Weimiaoyin Technology XT-3 True Wireless Earphone User Manual
XT-3 Wlire less earphone operating instructions
Charging the charge case
Insert the charging cable into the charging port, the red light flashing means charging, red light Chang Liang said has been full of
Charging the earphone
Put the earphones in the charging case, the green indicator light means charging, light off means it is fully charged.
Where to see the power display?
After the earphone have connected with the phone, there is a battery mark next to the bluetooth or earphone symbol to display the battery level.
Dual earphones mode
Method one:
After fully charged, take two earphones and wait about 5 seconds, the red and
blue lights flash, turn on Bluetooth on the phone, search for the pairing name
“XT-3” and click to connect.
Method two:
Charging the earphone Dual earphones mode After fully charged, take two
earphones and touch about 5 seconds, the red and blue lights flash, turn on
Bluetooth on the phone, search for the pairing name “XT-3” and click to
connect.
Single earphone mode
Method one:
After fully charged, take one earphone and wait about 5 seconds, the red and
blue lights flash, turn on Bluetooth on the phone, search for the pairing name
“XT-3″ and click to connect
Method two:
After fully charged, take one earphone and touch about 5 seconds, the red and
blue lights flash, turn on Bluetooth on the phone, search for the pairing name
“XT-3″ and click to connect
Earphone operation function
Power on: light touch 5 seconds
Power off: light touch 5 seconds
Next song: Double touch the right earphone
Previous song: Double touch the left earphone
Volume up: Triple touch the right earphone
Volume down: Triple touch the left earphone
Answer the call: Light touch either side
Reject the call: Light touch 2 seconds either side
Wake up voice assistant: Light touch 3 seconds either side
Chinese and English prompt tone switch
Double-click two earphone at the same time without connecting to Bluetooth
Standard accessories
About Signal
- Please notice the wearing method, do not cover the earphone by ear to prevent interruption of signal.
- Do not cover any one earphone on the dual earphones mode by hand, or it will result the interruption of signal.
- Please use this earphone under its working range (10 meters) and for best results avoid obstacles in between the connected devices.
- On the dual earphones model, sometimes the connected of “R” maybe interrupted, please check the using condition or the working range.
How to wear the earphone
Parameters of earphones:
Model name: XT-3
Version: 5.1+EDR
Charging Voltage: DC 5V
Battery Voltage:3.7V
Charging time: 0.8H
Talk time: 4H
Music time:4H
Work range:10m
headphones capacity: 25mAh
Standby time: 40h
The specification of charging case:
Input earphones Current: 5V/100mA
Battery capacity:250mAh
Charging times for earphones: 2-3times
Warning
- Please do not take the earphones apart and remodel, otherwise, it may cause electrical breakdown by the fire or even completely damage the product.
- Please do not put the product to too high or too low temperature(Below 0°C or above 45°C).
- Please avoid using the device indicator light near the eyes of children or animals
- Please do not use the device under thunderstorms. It may cause the device to malfunction and increase the risk of electric shock.
- Please do not wipe the product with oil or other volatile liquids.
- Please do not let the device get wet with liquids.
Note
It may cause hearing damage under longtime using, please arrange the use time
reasonably.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
› -Reorient or relocate the receiving antenna.
› -Increase the separation between the equipment and receiver.
› -Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
› -Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>