RENESAS OB1203SD-BT2-EVK Evaluation Kit for Heart Rate SpO2 and Respiration Rate User Guide
- June 6, 2024
- RENESAS
Table of Contents
RENESAS OB1203SD-BT2-EVK Evaluation Kit for Heart Rate SpO2 and
Respiration Rate User Guide
Go to: renesas.com/ob1203sd-bt2-evk/dashboard.html
Note: The Web Application runs on Microsoft Edge or Google Chrome using a
Windows PC (V10 or above). It uses the computer’s built in Bluetooth (BLE)
capability to connect to the EVK. PC’s Bluetooth must be enabled. Compatible
browsers are listed here: caniuse.com/web-bluetooth
OB1203SD-BT2-EVK will time out after ~30s without a finger on the sensor to
extend battery life.
Optionally the measurements can be observed using a USB cable and Serial Plot.
hackaday.io/project/5334-serialplot-realtime-plotting-
software/log/192838-serialplot-v012-release
Note: USB connection must be plugged in AFTER the board is powered up
(red LED on).
Port: Baud Rate 115200, No Parity, 8 bits, 1 Stop Bit, No Flow Control
Data Format: ASCII, Number of Channels: 5, Column Delimiter: comma
Optionally the measurements can be observed using a USB cable and PuTTY
chiark.greenend.org.uk/~sgtatham/putty/latest.html
Note: USB connection must be plugged in AFTER the board is powered up
(red LED on).
Notice and Disclaimer
The OB1203SD-BT2-EVK is provided for reference, demonstration, and/or
evaluation. No performance is guaranteed or warranted, nor is fitness or
suitability for any medical device application claimed. Renesas will not
indemnify customers using any part of the provided reference code. OEM is
responsible for performance of products made using any of the provided
reference code. For general questions contact Renesas. In addition, for
medical devices Renesas strongly recommends to consult a medical device
regulatory compliance advisor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>