Acrojoy A01001 Truvity 600W Native 1080P 5G WiFi Projector User Manual

USER MANUAL
Truvity 600w

Please read this manual thoroughly before using it and keep it for future reference.
– Email: support@projectorcs.com –
Thanks for choosing our product.
If you have any concerns or need any help,
please contact us at
support@projectorcs.com

WHAT’S INCLUDED

NOTICE

FUNCTION OVERVIEW

QUICK START

|
---|---

INPUT SOURCE

Press on the projector/remote to enter the interface of Input Source.

PROJECTOR CONNECTION

TROUBLESHOOTING GUIDE

1. The content from Hulu, Netflix, and similar services can not be mirrored or cast?
   • Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast.

2. What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
   • Please prepare a Fire TV stick, Roku stick, or ChromecastTM (not included), then connect it to the projector to watch the content.

3. Video Playback at 4K Resolution.
   • The 4K video content can be presented by connecting the projector to a laptop or a TV stick, but it cannot be presented via a USB drive.

4. *Remote Unresponsive Make sure remote points at IR receiver directly.*
   • Do not cover IR receiver. Replace the old MA batteries with new ones.

5. *Blurry Image Adjust focus ring/keystone.**
   • Projector and screen/wall must be ineffective distance.

6. Factory Reset
   • Go to Menu > OPTION > Restore Factory Default to restore the projector to default settings.

7. Resetting of the Screen Mirroring Module.
   • If the projected image freezes when you switch the screen mirroring interfaces, you can’t find or fail to connect the corresponding WiFi network, please press and hold the OK button for 5 seconds on the projector/remote to do a reset. The reset progress will complete in 1 minute. Please wait patiently.

8. Upside Down Images
   • Go to Menu > PICTURE > Projection Mode to flip the projection image.

SCREEN MIRRORING

Important:

1. Before screen mirroring, please press the button on the projector/remote to enter the interface of Input Source and select Screen Mirroring.
2. Press the OK button on the projector/remote to switch the interfaces between Screen Mirroring for iOS System and Screen Mirroring for Android System.

Screen Mirroring through Wireless Connection
For iOS System
• Streaming with cellular data

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.

2. Go to the settings of your iOS mobile device and connect it to the WiFi of 600W-XXXXXX (password: 12345678).

3. Activate Screen Mirroring/AirPlay Mirroring on your iOS device and search for the projector.

4. Select 600W-XXXXXX-ITV from the searching results to connect.

5. The display of your iOS mobile device will be projected to the wall/screen via cellular data after a successful connection.

• Streaming with your router’s WiFi

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.

2. Go to the settings of your iOS mobile device and connect it to the WiFi of 600W-XXXXXX (password: 12345678).

3. Visit http://192.168.49.1 from a browser on your mobile device, tap WiFi AP > Scan, select your router’s WiFi and enter the right password, then tap Connect to continue.

4. Your router’s WiFi will be displayed on the interface of Screen Mirroring for iOS System after a successful connection.

5. Get back to the WiFi setting of your iOS mobile device, then connect it to the same router’s WiFi.

6. Activate Screen Mirroring on your iOS device and search for the projector, then select 600W-XXXXXX-ITV from the searching results to connect.

7. The live streaming content from your iOS mobile device will be projected to the wall/screen through a WiFi connection.
   Tip: If you’d like to connect to another router’s WiFi, please repeat the procedures mentioned in the section of Streaming with your router’s WiFi.

For Android System
To activate this function, your Android device must support Multi- Screen/Wireless display/Smart View. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the Input Source, then press the OK button on the projector/ remote to switch to the interface of Screen Mirroring for Android System.
   

2. Activate the Multi-Screen/Wireless Display/Smart View function on your Android device and search for the projector.

3. Select 600W-XXXXXX from the searching results to connect.

4. Your Android device display will be projected to the wall/screen after a successful connection.

Important Tips for Wireless Connection

1. If the projected image freezes when you switch the screen mirroring interfaces, you can’t find or fail to connect the corresponding WiFi network, please long press the OK button for 5 seconds on the projector/ remote to do a reset. The reset progress will complete in 1 minute. Please wait patiently.
2. Due to the copyright restriction from Netflix, Hulu, and similar services, the contents MAY NOT be mirrored or cast.
3. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100M bit or more is recommended when using screen mirroring.
4. Make sure your projector is close to the mobile device and the router when using a wireless connection.
5. Some mobile devices may not support screen mirroring due to compatibility.

• Upgrade the Firmware Version of Screen Mirroring
When there is a newer version, you will see Discover new firmware… on the projected screen, please press OK button on the projector/remote and follow the steps to upgrade the firmware version of screen mirroring as needed.
Notes:

1. Make sure the projector is connected to WIFI and DO NOT power off during updating.
2. It takes around 6-8 minutes for the update to complete, please wait patiently.
3. The screen mirroring system will restart once the upgrade is completed.

Screen Mirroring with the Original USB Cable

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring for iOS System.

2. Connect your iOS mobile device to the USB port of the projector with the ORIGINAL lightning cable.

3. Select Trust in the pop-up window of Tr u st This Computer.
   For iOS System
   Trust This Computer?
   Your settings and data will be accessible from this computer when connected wirelessly or using a cable.
   Trust Don’t Trust

4. The display of your iOS mobile device will be projected to the wall/screen after a while.

** Tip:
If the projection fails, please unplug the lightning cable from the projector and repeat the steps mentioned above.
For Android System
**

1. Turn on the projector, select Screen Mirroring as the input source, then press the OK button on the projector/ remote to switch to the interface of Screen Mirroring for Android System.

2. Go to the settings of your mobile device, find Developer options, and turn on USB debugging.
   Tip: The steps to turn on Developer options vary from different models of Android devices. You may check it from the Internet or contact us for the detailed steps. We take Samsung Galaxy S8+ as an example.
   • Go to settings of your Android device, then tap About phone > Software information > Build number.
   • Continuously tap on Build number several times until it shows Developer mode had been turned on.
   • Get back to the settings of your mobile device, it will show Developer options.

3. Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable.

4. Tap OK when your Android mobile device pops out the window of Allow USB debugging?, then your Android device will be projected to the wall/screen.

Allow USB debugging?
USB debugging is intended for development
purposes only. It can be used to copy data
between your computer and your device,
install applications, and read log data.
CANCEL
OK
Allow USB debugging?
The computer’ s RSA key fingerprint is:
9D:BF:CE:3E:80:D7:12:89:2A:6E:1D:
30:74:5E:34:7B
0 Always allow from this computer
CANCEL
OK
Notes:

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring the data.
2. Some mobile devices may not support screen mirroring due to compatibility.
3. Some Android mobile devices may only transfer the display without audio due to protocol restrictions.

PROJECTION DISTANCE&SIZE
• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
• Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

AAC/MP2/MP3/PCM/FLAC/WMA
Video Format Supported| AVI/MP4/MKV/FLV/MOV/ RMVB/MPEG2/MPEG1/ 3GP/H.264/XVID| Ports| HD In x 2/USB x 1/Audio Out x 1/ AV In x1
Mounting Screws| M4 Metric| Number of Screws| Not Included

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1.  this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

 The device is in compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from the body to use the device is 20cm.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation of this device in the band 5150-5250 MHz is restricted to indoor use only.

V1.02

Documents / Resources

| Acrojoy A01001 Truvity 600W Native 1080P 5G WiFi Projector [pdf] User Manual
A01001, Truvity 600W Native 1080P 5G WiFi Projector
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>