PaMu Z1 Bluetooth 5.2 Active Noise-Cancelling Earbuds User Guide

June 6, 2024
PaMu

PaMu Z1 Bluetooth 5.2 Active Noise-Cancelling Earbuds User Guide

Tips

  • Bluetooth Signal is easily interferred in the following environment.
    1. Compact environment with multiple Wi-Fi signals and Bluetooth Signals.
    2. Airport, railway, metro where electromagnetic interference is strong.

  • Current bluetooth technology cannot guarantee synchronization of gaming and video playing.

  • During use, the microphone of the earphone may be blocked by water, sweat, dirt, etc., which will affect the active noise control effect, or you may hear abnormal sound (whistling sound). In these cases, it is suggested to use a dry lint-free soft cloth to clean the earphone or dry it by cool air..

In order to obtain a more stable and better experience, it is recommended to use mobile phones with Android 6.0, iOS 10.0 or higher OS versions.

How to power on and pair the earphones (step 1)

Power on:

Method 1. Take out the earphones from the stand, they will start up automatically and enter the pairing mode (make sure the stand is charged).
Method 2. Touch the button of the earphone to turn it on (the earphones must not be in the charging case and must be off).

How to power on and pair the earphones (step 2)

Pairing of the main earphone:

Turn on your phone’s Bluetooth, search for “PaMu Z1” in the available devices list, and click on it to complete the pairing of the main earphone.

How How to wear

Earbuds with appropriate sizes are of great importance to the noise reduction experience, sound quality and comfort. Our earphones are equipped with XS, S, M, and L earbuds (M earbuds are installed on the earphones), please try on different sizes of earbuds and choose.

Choose the right earbuds

Earbuds with appropriate sizes are of great importance to the noise reduction experience, sound quality and comfort. Our earphones are equipped with XS, S, M, and L earbuds (M earbuds are installed on the earphones), please try on different sizes of earbuds and choose.

How to use (Touch Button)

How to Shut Down and Charge

About 6.5 hours Battery life
About 3 times Mobile charger

When the earphone is placed in the charger, it will automatically shut down and charge (when the charger’s battery is less than 30%, the charger’s indicator blinks for 5 seconds, when the charger’s battery is more than 30%, the charger’s indicator lights up for 5 seconds. The red indicator of earphone is always on while charging, and it goes off when fully charged)

How to Charge the charger

Supplier’s Declaration of Conformity

Product Details: Product Name: PaMu Z1 Bluetooth Earphones Model Number: T11 P Trade Mark: Padmate
Responsible Party Company Name: Address: Contact Person: E—mail: Phone No.: Fax No.: Website:
U.S. Contact Information
Applied Standards Part 15 Subpart B — Section 15.107 and 15.109 ANSI 063.4:2014 Class B

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designec to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. The device has been evaluatec to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Declaration of Conformity

Frequency Bands:2400-2483.5MHz EIRP Max Power:4dbm
Manufacture’s Trade name/Mark: Padmate Full Postal Address: 6F, Innovation Mansion, NO.1300 Jimei Anenue, Xiamen, China,P.R Web Address: www.padnnate- tech.com
Importer’s Label:Trade Name/Mark: Full Postal Address:
Product Name/Type: PaMu Z1 Bluetooth Earphones Batch/Serial Number:

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals