PaMu Z1 Lite Bluetooth 5.2 Active Noise-Cancelling Earbuds User Guide
- June 6, 2024
- PaMu
Table of Contents
- How to power on and pair the earphones (step 1)
- How to power on and pair the earphones (step 2)
- How To Wear
- Choose The right earbuds
- How To Use ( Touch Button)
- How To Shut down and Charge
- How to Charge The Charger
- Tips
- Supplier’s Declaration of Conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PaMu Z1 Lite Bluetooth 5.2 Active Noise-Cancelling Earbuds User Guide
h order to obtain a more stable and better experience, it is recommended to use mobile phones with Android 6.0, OS 10.0 a higher OS
How to power on and pair the earphones (step 1)
Power on:
Method 1. Take out the earphones from the stand, they will start up
automatically and enter the pairing mode (make sure the stand is charged).
Method 2. Touch The button of the earphone to turn it on (the earphones
must not be in the charging case and must be off).
How to power on and pair the earphones (step 2)
Pairing of the main earphone:
Tim on your phone’s Bluetooth, search for “PaMu Z1 Lite” in the available
devices list, and did< on it to complete the pairing of the main earphone.
How To Wear
Choose The right earbuds
Earbuds with appropriate sizes are of great importance to the noise reduction experience, sound quality and comfort. Our earphones are equipped with XS, S, M, and L earbuds (M earbuds are installed on the earphones), please try on different sizes of earbuds and choose
How To Use ( Touch Button)
How To Shut down and Charge
When the earphone is placed in the charger, it will automatically shut down and charge (when the charger’s battery is less than 30%, the charger’s indicator blinks for 5 seconds, when the charger’s battery is more than 30%, the charger’s indicator lights up for 5 seconds. The red indicator of earphone is always on while charging, and it goes off when fully charged)
How to Charge The Charger
Tips
- Bluetooth Signal is easily interfered in the following environment.
- Compact environment with multiple Wi-Fi signals and Bluetooth Signals.
- Airport, railway, metro where electromagnetic interference is strong.
- Current Bluetooth technology cannot guarantee synchronization of gaming and video playing.
- During use, the microphone of the earphone may be blocked by water, sweat, dirt, etc., which will affect the active noise control effect or you may hear abnormal sound (whistling sound) In these cases, it is suggested to use a dry lint-free soft cloth to clean the earphone or dry it by cool air
Supplier’s Declaration of Conformity
Product Details:
Product Name: PaMu Z1 Lite Bluetooth Earphones
Model Number . T11C
Trade Mark Padmate
Responsible Party – U.S. Contact Information
Company Name:
Address:
Contact Person:
E-mail:
Phone No.:
Fax No.:
Website:
Applied Standards
Part 15 Subpart B – Section 15.107 and 15.109
ANSI C63.4:2014
Class B
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. My Chaves or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits fa- a Class B digital device, pursuant to pat 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one a- more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Correct the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Declaration of Conformity
Frequency Bands:2400-2483.5MHz
EIRP Max Power.4dom
Manufacture’s Trade name/Mark:
Padmate Full Postal Address: 6F, Innovation Mansion, NO.1300 Jimei Avenue,
Xiamen, China,P.R
Web Address: www.padmate—tech.com
Importer’s Label:Trade Name/Mark:
Full Postal Address:
Product Name/Type: PaMu Z1 Lite Bluetooth Earphones
Batch/Serial Number:
PaMu Z1 Lite Bluetooth Earphones
Xiamen Padmate Technology Co.,LTD. Add:6F,lnnovation Manslon,N0.1300 Jimel
Avenue, Xiamen,361021,ChIna,P.R www.padmate-tech.com
www.facebook.com/PadmateTech/