Retro Boombox Cassette Player AM/FM Radio Stereo, AC Powered-Complete Features/Instruction Guide
- June 5, 2024
- SEMIER
Table of Contents
SEMIER
Retro Boombox Cassette Player AM/FM Radio Stereo, AC Powered
Specifications
- BRAND : SEMIER
- CONNECTIVITY TECHNOLOGY : Auxiliary
- POWER SOURCE : Battery Powered
- ITEM WEIGHT : 2.5 Pounds
- WATTAGE : 6 watts
- AM: 520-1710kHz
- FM: 87-108 MHz
- DIMENSIONS: 9.5 x 3.3 x 4.5 in, 2.2 pounds/1kg
- POWER: 110V AC charging or 4 C Batteries
- POWER CONSUMPTION: 6W
Introduction
Play your tape collection to transport yourself back in time and relive happy experiences. External voice, radio, or PC music can be recorded into cassette using the built-in microphone. With a long antenna and an improved DSP chip, this cassette radio player provides excellent reception for AM/FM channels, allowing you to listen to your favorite radio stations even when you are indoors. This portable cassette player radio is built of Hips material with a good texture, which is eco-friendly. It is appropriate for both elders and children to use because of its portable size, large button for easy operation, large read dial, fine tuning, and easy grip knobs. This battery-powered cassette player features a large 6W speaker that can easily fill a room with stereo music. This radio cassette player also contains a 3.5mm headphone port so you may listen to music without being disturbed.
Turn on the AC and turn on the boombox cassette player to listen to your favorite tunes in your room (Power Cord Included). When power outages occur, this boombox tape player runs on 4xC cell batteries, allowing you to listen to “Golden Oldies” or hear real-time broadcast news at any time (Battery Not Included).
PACKAGE INCLUDES
- 1xPortable Radio Cassette Player/Recorder
- 1xUser Manual
- 1xPower Cord
HOW TO USE
- Ensure that the boombox is switched off.
- Connect one end of the 3.5 mm AUX cable (not provided) to the back of your boombox’s AUX IN jack.
- Connect the other end of the cord to the audio device’s Line-out jack, such as an iPod or other MP3 player.
- To switch on the boombox, press (Standby/ON).
HOW TO CONNECT
Navigate to the Bluetooth Settings page. In the list of nearby Bluetooth devices, tap UE Boombox. Turn up the volume on the speaker. The speaker’s status light flashes rapidly, indicating that it is ready to pair with a device.
HOW TO TURN ON CD PLAYER
If a disc has already been loaded, the disc is ejected by pushing the [CD] button. The CD will begin playing right away. To switch to CD mode when a CD is already loaded, press the [DISC] button. To go to disc mode, first push the [DISC] button for less than a second.
Frequently Asked Questions
-
Can a boombox be used to listen to the radio?
A boombox is a gadget that can receive radio stations as well as play recorded music (usually cassettes or CDs usually at a high volume). -
What is the definition of a radio cassette player?
an electronic device that consists of a tape deck, one or more amplifiers, and loudspeakers that is used for recording and reproducing sounds on magnetic tape. -
Is it possible to have stereo cassette tapes?
On the tape, there are two stereo pairs (four total) or two monaural audio tracks; one stereo pair or one monophonic track is played or recorded while the tape is travelling in one direction, and the other (pair) when the tape is travelling in the other direction. -
What are the controls on a boombox?
Bluetooth pairing, Volume down, Power/Connect+, Volume up, and Play/Pause/Voice assistant/Speakerphone are all located immediately below the handle on the Boombox. More information on these features can be found in the Design and Features section below. -
On a boombox, how do you play a cassette?
To turn on the boombox, press (Standby/ON).
Select TAPE mode by continuously pressing (source). The word “CAS” appears on the screen.
To open the cassette door, press STOP/ EJECT. -
What does my speaker’s M button do?
To switch between headphone and AUX mode, press and hold the M button. You can use this section to connect your speaker to other media devices. -
What is the best way to connect my Boombox 2?
Hold down the Bluetooth button for at least 3 seconds, or until the light flashes blue, to put it in pairing mode. Find the JBL Boombox on your device and connect them. The two devices will sync, and the FLIP will emit a tone to indicate that it was successful. -
Why isn’t my CD player working?
If a CD player skips, double-check that the CD isn’t scratched or unclean. Check the belt for filth or wear, and the tray for misalignment if a CD player tray won’t open or close properly (remove, clean, lubricate, and reinstall). Check and clean dirty output jacks if the sound from a CD player is distorted. -
What’s the deal with my CD not playing?
If the disc still won’t play, open the disc compartment and leave your device for an hour to let any moisture condense evaporate. The laser picks up on your device may be dusty if it won’t play any of the discs. IMPORTANT: Lens cleaners for CD or DVD players are not suggested. -
When it comes to cassette tapes, how long do they last?
Your audio cassette cassettes can last up to 30 years if properly cared for. Many circumstances, however, can drastically reduce that longevity. You’ve most likely done the math by now. Because it’s been nearly 40 years, your cassette cassettes may be in jeopardy!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>