Blueshift Handheld Nutrition Smart Bottle Instruction Manual
- June 6, 2024
- Blueshift
Table of Contents
Handheld Nutrition Smart Bottle
Instruction Manual
Read all instructions before use
For your safety and continued enjoyment of this product, always read the
instruction manual before using it.
Introduction
You have made an excellent choice with the purchase of this Blueshift Smart
Bottle.
By doing so you now have the assurance and peace of mind which comes from
purchasing a product that has been manufactured to the highest standards of
performance and safety, supported by the high-quality standards of Blueshift
Nutrition. We hope you will enjoy using your purchase for many years to come.
If you require technical support or in the unlikely event that your purchase
is faulty please email us at
hello@blueshiftnutrition.com for
assistance.
Features
Safety Information
This appliance is for HOUSEHOLD USE ONLY.
Read instructions before using.
Scan the QR code on the Power Puck to return to these instructions.
WARNING: When using electrical appliances especially when children are
present, basic safety precautions should always be followed to reduce the risk
of fire, electric shock, and/or injury to persons, including the following:
CAUTION: Spinning Blending Whisk, handle carefully.
Unplug the charger before assembling parts.
Do not put a Power Puck in water.
To protect against electrical shock, do not put the Power Puck, cord, or
electrical plug of this product in water or other liquid. The rest of this
appliance, where the Blending Whisk and Pods are housed, has been designed for
submersion in water or other liquids. Never submerge the Power Puck of this
unit. If the assembled Blueshift Nutrition Smart Bottle falls into a liquid,
remove it immediately.
Do not reach into the liquid without unplugging the charger first.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge unless they are closely supervised and instructed concerning the use
of the appliance by a person responsible for their safety. Close supervision
is necessary when any appliance is used by or near children. Children should
be supervised to ensure that they do not play with the appliance.
Unplug from outlet when not in use, charging, before putting on or taking off
parts, and before cleaning. To unplug, grasp the plug, and pull from the
electrical outlet. Never pull a cord.
For charging, use only with listed/ certified IT equipment for the cable and
wall plug.
Do not use an extension cord. Plug directly into an outlet.
Do not operate without a Dispenser Head in place.
Do not operate this Smart Bottle with a damaged cord or plug or after the
Smart Bottle malfunctions or has been dropped or damaged in any manner.
If you require technical support or in the unlikely event that your purchase
is faulty please email us at
hello@blueshiftnutrition.com for
assistance.
Use this Smart Bottle for its intended use. The use of attachments or
accessories not recommended by Blueshift Nutrition may cause fire, electrical
shock, or risk of injury.
Do not use outdoors in inclement weather or for commercial purposes.
Do not let the cord hang over the edge of the table or counter, or touch hot
surfaces including the stovetop.
Before cleaning, remove the Power Puck from the Smart Bottle.
Do not operate with hot liquids. The Blending Whisk can create turbulence in
the liquid which could spill out.
Keep hands and utensils out of the container to reduce the risk of injury to persons or damage to the Blending Whisk.
Never add to the container while the appliance is operating.
*Container must be properly in place before operating the appliance.
This Smart Bottle is for HOUSEHOLD USE ONLY. It may be plugged into an AC
electrical outlet (ordinary household current). Do not use any other
electrical outlet.
FCC WARNING: This equipment may generate or use radiofrequency energy. Changes
or modifications to this equipment may cause harmful interference unless
modifications are expressly approved in the instruction manual. The user could
lose the authority to operate the equipment if an unauthorized change or
modification is made.
The device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions.
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesirable operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure conditions without restriction.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected Consult the dealer or an experienced radio/TV
technician for help.
The rating information is located on the top of the Power Puck.
Scan the QR code on the Power Puck to return to these instructions.
SAVE THESE INSTRUCTIONS
How to Operate
WASH & CHARGE
Remove and recycle the shipping ring.
Thoroughly wash the Pod Shifter, Dispenser Head, and Mixer Cup – BUT DO NOT
WASH THE POWER PUCK! Charge the Power Puck fully, then attach it to the Mixer
Cup by twisting clockwise to lock it into place.
FILL WITH WATER
Add 14 oz of cold water to the fill line and screw the Dispenser Head onto the
Mixer Cup.
SELECT A POD
Add up to 3 Pods to the Pod Shifter, curved side out, and place the Pod
Shifter back on the bottle. Rotate the Shifter counter-clockwise until the Pod
you want to drink first is positioned near the Puncture Lever. Then rotate the
Pod Shifter clockwise slightly until there is a click.
PULL THE LEVER
Pull the Puncture Lever down fully.
MIX & ENJOY
Tip the Smart Bottle back and forth with a strong wrist shake to activate the
Shake-to-Blend technology. The light ring will rotate blue as the drink mixes
for 10 seconds. Once t’s mixed, open the Flip Lid, sip, and enjoy that in-the-
flow feeling.
Using your Blueshift Smart Bottle
SHAKE-TO-BLEND
After dispensing your desired Pod, tip the Smart Bottle back and forth with a
strong wrist shake to activate the Shake-to-Blend technology. The light ring
will rotate blue as the drink mixes.
LIFT-TO-BLEND
Lifting the Smart Bottle off the surface activates a quick-mix function which
ensures a perfectly smooth drink with every sip. When Lift-to-Blend is
activated, the light ring briefly rotates blue.
SILENT MODE
To pause Lift-to-Blend and drink reminders, double-tap the top of the Smart
Bottle (like double-clicking a mouse). The light ring will briefly flash
orange to show silent mode is on.
EXIT SILENT MODE
To restart Lift-to-Blend and drink reminders, activate the Shake-to-Blend
technology as described above. The light ring will rotate green.
DRINK REMINDER
Every 30 minutes, the Smart Bottle will remind you to drink so you can stay on
top of your hydration.
The light ring will flash a quick blue or orange heartbeat, which repeats
every 2 minutes until the Smart Bottle is lifted or the reminder is silenced.
HYDRATION CELEBRATION
Congrats, you reached your hydration goal! The light ring will celebrate with
you by flashing a rainbow of colors. Hydration goals can be set up and managed
in the Blueshift app. If you need a little celebratory boost, you can activate
the light ring by pressing the Smart Bottle down on a surface for 12 seconds.
DISHWASHER WARNING
When the Power Puck is flipped upside down (as if you put it in a dishwasher),
the light ring will rapidly flash red as a warning. Always remember to keep
your Power Puck dry!
CLEANING YOUR SMART BOTTLE
To wash your Smart Bottle, place the Pod Shifter, Dispenser Head, and Mixer
Cup into the dishwasher or submerge in hot, soapy water. The Power Puck can be
wiped gently with a damp cloth or sponge, but never submerged in water or run
through the dishwasher.
This Smart Bottle only requires regular cleaning.
This Smart Bottle only requires regular cleaning. There are no user-
serviceable parts. Do not try to repair it yourself. Please contact Blueshift
Nutrition if servicing is needed.
IMPORTANT: UNPLUG CHARGER BEFORE CLEANING. DO NOT IMMERSE THE POWER PUCK
IN WATER OR ANY OTHER LIQUID. CLEANING YOUR BLUESHIFT SMART BOTTLE
Always clean your Smart Bottle thoroughly after using it.
Twist off the Power Puck. Clean the exterior of the Power Puck with a sponge
or damp cloth. Do not use an abrasive cleaning tool on the Power Puck. The
Power Puck should not be immersed in water. Allow it to dry before
reassembling.
Rinse the Mixer Cup. Wash the Mixer Cup with soap or detergent and a gentle
brush. Sanitize the Mixer Cup.
Rinse the Dispense Head. Wash the Dispense Head on both sides with a gentle
brush and soap or detergent. Do not scrub so vigorously to move any of the
seals out of place. If the seals become unseated, gently push them back into
place. Sanitize the Dispense Head from all angles. Rinse the Pod Shifter.
Wash the Pod Shifter with a brush and soap or detergent. Sanitize the Pod
Shifter.
Allow all the components to dry.
Customer
Service
hello@blueshiftnutrition.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>