SACKit B07BZLDG8H MOVEit X Bluetooth Speaker User Guide

June 6, 2024
SACKit

SACKit logo

SACKit B07BZLDG8H MOVEit X Bluetooth Speaker

SACKit B07BZLDG8H MOVEit X Bluetooth Speaker

Feature

  • Bluetooth speaker
  • Changeable front
  • Portable
  • Danish design
  • Stationary use
  • Great sound

Quick start guide

  • Charge the speaker for at least 4 hours
  • Turn on the speaker by pressing the Power Button
  • Turn on Bluetooth on the device you want to connect to the speaker Choose “MOVEit X” in the Bluetooth settings on your device
  • Start playing music from your device
  • Nod your head and dance

Connect two MOVEit X speakers

If you have two MOVEit X speakers it is possible to use these in True Wireless Stereo:

  • Power on both speakers
  • Click the Bluetooth button two times to enter pairing mode (the Bluetooth light will flash fast incorrect pairing mode)
  • When the speakers are connected in TWS the Bluetooth light will stop blinking on one of the speakers

User manual

Warning: Read the user manual thoroughly before using the product. Download user manual online at: sackit.eu/support
Please download the user manual and save it for future use. In the user manual, you will find instructions and important safety information.

Safety information

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television recep­tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol lowing measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

  1. Battery
    A. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type
    B. batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like

  2. Adapter
    A. The MAIN plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
    B. Use only power supplies listed in the user instructions: SHENZHEN FUJIA APPLIANCE CO., LTD., FJ-SW1502400N, 100-240V~ 50/60Hz 1.SA Max, DC15V 2400mA

Declaration of Conformity

Hereby, SAC Kit ApS declares that the radio equipment type MOVEit X BT is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://SACKit.eu/support

Bluetooth Version: BTS.0
Frequency bands: 2402-2480MHz
Power transmitted: Maximum 10dBm

To prevent overheating, please do not install the speaker in enclosed spaces. Be sure to set aside at least 10cm around the product for ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
Do not place this device in or close to sources of excessive heat or fire. (Such as: candles, fireplaces or direct sunlight).
This product contains a battery. The product cannot be discarded as general living garbage. Please understand the local classification about collecting the provisions of battery. The correct disposal of the battery helps to avoid the potentially negative impact on the environment and human health.

This symbol, affixed to the product or its packaging, indicates that the product must not be processed with household waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By ensuring the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal centre or the store where the product was purchased.

Class II Equipment Indoor use only To Identify the positive and negative connections(the polarity) of a.d.c. power supply, or the positive and negative connections on a piece of equipment to which a.d.c. power supply may be connected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals