havit TW925 True Wireless Stereo User Manual
- June 6, 2024
- havit
Table of Contents
User’s manual
True wireless stereo earbuds TW925
Product and accessories
| Earbuds 2
---|---
| Charging case 1
| 2 pairs of ear cap (US size. M equipped)
| Charging cable ‘I
| User manual I
| Certificate of quality ‘I
Description of product structure
- MFB (Touch panel)
- Indicator fight
- MIC
- Power LED inckcator 5.Charging port
Wearing method
Gently cram the earbuds into the cochlea then adjust the appropriate angle
Basic function
01 Power on, Bluetooth connection —Follow the steps (Please confirm that your
phone is a built-in Bluetooth function)
1. Power on
Method 1: Remove earbuds from the charging case.
Method 2: li the earbuds are powered off outside the case, touch and hold the
MFB button for 3 seconds on both sides to turn them on. Turn on both earbuds,
the earbuds indicators flash white, when the right earbud indicator flashes
white and orange, the left earbud indicator is turned off, the product is
ready for use.
2. Turn on Bluetooth on your device and select “HAVIT TW925 ” referring to
your phone instructions.
3. Pairing mode can last up to 180 seconds if you miss the pairing time, you
need to restart the device and operate following the procedural steps
mentioned above.
*Note*
a). HAVIT TW925 remembers previously connected devices. When turned on,
earbuds attempts to reconnect to previously connected devices.
b). HAVIT 1W925 will lose the connection when deviating the working range of
Bluetooth. The earbuds will reconnect automatic if you come back to the range
in 3 minutes.
02 Power off
Method 1: Put the earbuds into the charging case, they will automatically shut
off.
Method 2: Touch and hold MFB for 3 seconds, the white light flashes three
times, and the earbuds are turned off.
03 Answering incoming calls Short press left or right MFB to answer
incoming calls.
04 End the call Short press the left or right MFB to end the current
call.
05 Decline incoming calls Touch and hold the left or right MFB for 2
seconds to reject a call.
06 One key for voice assistant Double-tap either the left or right MFB to
activate voice assistant.
07 Music playing**
- Play/Pause: tap the left or right MFB once;
- Long press the left MFB for 2s to switch to the previous song
- Long press the right MFB for 2s to switch to the next song
08 Mono mode (take out any earbuds as a unilateral Bluetooth earbud)
(note: single channel mode only needs to remove one earbud from the charging
case; If two earbuds are removed before connection, the earbud will be used in
bilateral channel mode by default.)
1. Take out an earbud from the charging case, the earbud automatically turns
on and reconnects to previously connected devices.
2. Switch from one earbud to the other when playing music, taking out the
other earbud from the charging case and these two earbuds will connect
automatically. Both earbuds will play music automatically and then put the
earbud which do not need anymore into the charging case and the switching
process completes. (note: Call mode is applicable)
09 Clear the pairing list
Take out both earbuds from the charging case and turn them off. And then touch
and hold both MFB for 10 seconds, the earbuds will restart.
10 Charging -Case Charge the case using the Type-C cable connected to a
computer or wall charger. The power LED indicator flashes white when charging
and turns solid white when fully charged.
-Earbuds Put the earbuds back into the charging case for charging. While
charging, the indicators turn white. Once full of charge, the white lights
turn off.
Specification
Bluetooth Version: V5.1
Earbud Battery: 30mAh2(Fully charged in 1.5H)
Charging case battery: 300mAh
Charging case dim on:
Earbud dimensions: 201512mm2
Net weight: 4.0g2(Earbuds)/20g(Charging case)
Wireless working range: 10M (without obstacles)
Speaker: 8MM2
Speaker frequency: 20—-20KHz
Input voltage / current: DC 5V/1A
Play time: 3-3.5H (60% volume)
Talk time: 3H Standby time: 100H
Charging time: About 2H
Warnings
1. Please follow the instruction to operate.
2. Please charge the earbuds with input power below 5V/1A, in order to
protect the battery.
3. Please store or use the earbuds in a normal temperature environment.
4. Please do not use this product near the water. Do not immerse this product
in any liquid or splash any liquid on this product.
5. Please keep the earbuds from the heat sources, such as radiators, hot air
regulators, stoves, or other heat-generating instruments. As it is not anti-
high temperature. 6. Don’t jam the ports of the earbuds, such as charger port,
LED port microphone etc.
7. In order to protect your hearing and extend the speaker service life, it
is not recommended to adjust the volume to the maximum level for a long time.
8. Whatever reasons damage the earbuds, please feel free to contact our
after-sales staff in time rather than repair by yourself. Otherwise. you will
accept without after-sales service.
Activate Windows Go to Settings to activate W
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure iL conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>