Hisense MW506 WIFI Module User Manual
- June 6, 2024
- Hisense
Table of Contents
The user manual of TV’s WIFI module
1. The product description
The user can achieve a TV connection WIFI net, through this module and the
voltage supplied by the system to the module needs to be transmitted by a
voltage regulator or circuit This equipment may be operated in all European
countries. The module consists of an SMT metal antenna and an external IPEX
antenna.. When the module works,
choose one antenna with a strong signal according to the signal strength.
During the test, the test can be performed separately; the metal antenna of
the on-board patch only or external IPEX antenna only. The module installation
method is as follows: pass the large round hole of the module through the
limit column of the bracket of the TV, and fix the module by the snap-fit on
the bracket. Connect the external IPEX antenna to the antenna pedestal of the
module when Host is installing the module, ensure that a stable rated voltage
is provided for the module to use. It is better to have a voltage regulator
line or voltage regulator at the input power terminal of the module before
providing power to the module.
2. Basic parameters
| Feature Description | Feature Description |
|---|---|
| Model | MW506 |
| Product Name | WiFi Module |
| FCC ID | SARMW506 |
| IC ID | 27123-MW506 |
| Interface | USB2.0 |
| Supply Voltage | 3.3V±0.33V |
| Dimension | 30 (mm) 47 (mm) 6.2(mm) |
| Operating Temperature | -10° C to 70° C |
| Storage Temperature | -40° C to 85° C |
3. RF output power
| Band| Limited power
---|---|---
WIEN| 2412MHZ-2472MHZ| <20
5150MHZ-5850MHZ
4. The display method of Model approved code
In the factory， the model approve code is pasted on the back shell in a label.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures：
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of FCC RF Rules.
This equipment should be installed and operated with a minimum distance of 20
in (50cm)between the radiator and your body. This transmitter must not be
co‐located or operated in conjunction with any other antenna or transmitter
CAUTION:
To comply with the limits of the Class B digital device pursuant to Part 15 of
the FCC Rules, this device is compliant with Class B limits. All peripherals
must be shielded and grounded. Operation with non‐certified peripherals or
non‐shielded cables may result in interference to radio or reception
MODIFICATION
To assure continued compliance, any changes or modifications not expressly
approved by the grantee of this device could void the user’s authority to
operate the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 50 cm(8 in )between the radiator and your body NOTE To
satisfy FCC exterior labeling requirements, the following text must be placed
on the exterior of the end product
Contains Transmitter Module FCC ID: To satisfy IESD exterior labeling
requirements, the following text must be placed on the exterior of the end
product ” Contains Transmitter Module IC:
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop
where you purchased the product. The device is restricted to indoor use only
when operating in the 5150 to 5350 MHz frequency range.
| BG| CZ| DK| DE| EE| IE| EL| ES| FR| HR
---|---|---|---|---|---|---|---|---|---|---
CY| LV| LT| LU| HU| MT| NL| AT| PL| PT
SI| SK| Fl| SE| UK| NO| IS| LI| CH| TR
8. IC Statement
i、the device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems; Footnote4
ii、 for devices with detachable antenna(s), the maximum antenna gain permitted
for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that
the equipment still complies with the e.i.r.p. limit;
iii、 for devices with detachable antenna(s), the maximum antenna gain
permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits as appropriate; and
iv、 where applicable, antenna type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the e.i.r.p. elevation mask
requirement set forth in section 6.2.2.3 shall be clearly indicated.
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
“Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.”
IC ID：27123-MW506
Manufacturer: QingdaoHisense Communication Co., Ltd.
Address: 218 Qianwangang Road, Qingdao Economic & Technological Development
Zone,
Qingdao, China
Importers:
Hisense France SAS
Address: 9 Rue des 3 Soeurs, 93420 Villepinte, France
Hisense Iberia, S.L.U
Address: Ronda Auguste y Louis Lumiere. 23 Nave 12. Edificio Lumiere –
Parque
Tecnológico 46980
Paterna (Valencia) – Spain
Hisense Italia S.r.l
Address: Via Montefeltro, 6/A, 20156 MILANO
Hisense South Africa
Address: The Estuaries, Building 17 Oxbow Crescent, Century City, Cape
Town, SouthAfrica
Documents / Resources
|
Hisense MW506 WIFI
Module
[pdf] User Manual
MW506, SARMW506, MW506 WIFI Module, WIFI Module
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>