ZYPER4K 12V Rack Mount Power Center User Guide
- June 6, 2024
- ZYPER4K
Table of Contents
ZYPER4K 12V Rack Mount Power Center
ZyPer 12V Power Center
Congratulations on your purchase of the ZyPer 12V Power Center. Your complete
satisfaction is very important to us.
The ZyPer 12V Power Center is the ideal solution for reducing clutter in an equipment rack filled with power cables. Once installed, the ZyPer 12V Power Center centralizes power distribution and saves space.
The ZyPer 12V Power Center provides eight 12 V DC connectors in a sturdy, 1U, rack space. Simply install the ZyPer 12V Power Center in the equipment rack, connect the 12 V DC power cables, and connect the AC power cable. Up to eight 12 V DC power cables can be connected from the rear panel of the ZyPer 12V Power Center to each device. Press the power switch on the rear panel to power-on or power-off the unit. When powered, the LED indicator on the front panel will glow bright orange. The ZyPer 12V Power Center features a 16 A capacity (2.0 A per output, maximum) and a built-in circuit breaker. If the current draw is exceeded, the circuit-breaker will trip. Pressing the power button on the rear panel will reset the unit. Each power output has a grounding wire that is connected to the ZyPer 12V Power Center enclosure to prevent accidental grounding and electric shock. Two internal fans maintain low temperatures, even under maximum load conditions.
Features
- Centralizes power distribution for up to eight 12 V DC devices, eliminating the need for multiple power supplies
- Locking 12 V DC power connectors prevent devices from being accidentally unplugged due to cable stress
- Front-panel LED power indicator provides visual confirmation of power-on or power-off state
- Two internal fans maintain low enclosure temperatures
- Built-in circuit breaker
- Compact 1U form factor
- RoHS-compliant; built using environmentally-safe materials and construction
In the Box
- 1 x ZyPer 12V Power Center (with Rack Mount brackets)
- 8 x 3 ft (91.4 cm) locking 12 V DC power cables
- 1 x 3 ft (91.4 cm) AC power cord
- 1 x Quick-Start Guide
Panel Layout
| ID | Name | Description |
|---|---|---|
| 1 | Power LED | This LED indicator will glow bright orange when the unit is |
powered.
2| Cooling fan assembly| Provides active cooling for the unit by directing air
through the system, from front to back, keeping critical components operating
at optimum temperatures. To prevent overheating, make sure that these vents
are not blocked.
3| Locking power connectors| Connect the included power cables from each
locking power connector to each ZyPer4K or ZyPerHD device.
4| Power switch| Push this button to power-on or power-off the unit.
5| IEC power connector| Connect the included power cord from this power
receptacle to an available AC outlet.
Installation
- Mount the ZyPer 12V Power Center in the rack unit, using four screws (not included). The ZyPer 12V Power Center requires 1U of rack space.
- Connect the included power cables to each of the 12 V DC locking power connectors on the rear panel of the ZyPer 12V Power Center.
- Connect each of the power cables to the 12 V DC devices. Note that each connected device must not exceed 2 A /24 W (max.). The total power consumption must not exceed 16 A / 192 W.
- Connect the included AC power cord to the IEC power receptacle on the rear panel of the ZyPer 12V Power Center.
- Plug the AC power cord into an available AC outlet.
- Push the Power switch to the ON (up) position. The LED indicator on the front panel will glow bright orange to indicate that the ZyPer 12V Power Center is powered.
Specifications
| Item | Description |
|---|---|
| Output Cables | • 8 x 3 ft (91.4 cm), locking connectors. Cord Plug: 2.1mm |
I.D. x 5.5mm O.D., Female
Input Voltage / Frequency| • 110 ~ 240 V AC / 50 ~ 60 Hz
Power Output Ports| • 8 x 2.0 mm, 12 V DC
Output Voltage| • 12 V DC ± 5 %
Output Current| • 2.0 A (per port)
Output Current / Power| • 16 A / 192 W (max.)
Fan| • 2 x internal, 5200 rpm
• Current: 0.03 A (ea.); Power: 0.4 W (ea.)
Operating Temperature| • 32 ~ +113 ºF (0 ~ +45 ºC)
Storage Temperature| • -40 ~ +185 ºF (-40 ~ +85 ºC)
Operating Humidity| • 20 ~ 90% RH, non-condensing
Storage Humidity| • 10 ~ 95% RH, non-condensing
Ambient Noise| • 43.1 dB(A) continuous (Measured 1M distant, straight in
front of unit, 10 degrees offset above horizontal)
Dimensions (not including rack ears)| • 17.2 in x 6.75 in x 1.75 in
Unit Weight| • 5.29 lb (2.4 kg)