Orphek High End Acrylic Mounting Arms User Guide
- October 27, 2023
- Orphek
Table of Contents
ORPHEK AURA
FIXING BRACKET GUIDE
THANK YOU FOR PURCHASING ORPHEK PRODUCTS!
In this manual you are receiving all the information and details of the
product and also how to assemble and mount it over your tank.
Please feel free to contact us at any time at: contact@orphek.com
Orphek AURA Fixing Bracket Kit is designed specifically for the installation
and positioning of Orphek Aquarium LED illumination fixtures. Orphek AURA
Fixing Bracket Kit is designed with the brand’ s technology, quality and
conceptual design. You will find our Orphek AURA Fixing Bracket Kit versatile,
transparent, anti-rust, heavily-built and really easy to install! Not only
that, it can be also the ultimate gift for your fellow reefers!
FEATURES
COMPATIBILITY, VERSATILITY & LAYOUT
- lt can fix all sizes of Orphek OR LED Bar Lights.
- It will look very discreet and beautifulin any room.
- It will fit any tank glass till 20mm/0.78” maximum.
- It can hang any Orphek ORLED Bar Lights to the maximum of 125mm/4.92” height.
WHAT’ SIN THE BOX
- 2 transparent acrylic vertical tank mount brackets (235mmx105mmx40mm/ 9.25” x4.13”x1.57”)
- 4M4 16mm aluminum alloy screws
- 4M6 16mm transparent acrylic screws
- 4M6 25mm transparent acrylic screws
- 2 transparent acrylic clamps (71mmx44mmx50mm/2.80” x1.73”x1.97”)
SOLET S GET STARTED!
Before you start to assemble your Orphek AURA Fixing Brackets check:
VERY IMPORTANT! The glass of your tank can’ tbe thicker than 20mm/0.78”
and the maximum adjustable height is 125mm/4.92”.
- if you have all the components (check the list below)
- disconnect your Orphew ORLED Bar from the electricity
- decide which is the best layout for your tank and only then choose where to place the brackets
- decide the hight you wish to set for your lights according to your corals needs
Before you start to install your lights over your tank:
- check if all the parts assembled are perfectly placed and screwed, so it won tdismantle accidentally
- check if you have the skills and physical strength to mount it by yourself or you need a second hand to help you
Assembly of the OR lights with Orphek Aura and Placing the lights over
your Tank
STEP 1 Assembly the Orphek Aura as the picture below:
STEP 2 Place the2 pcs of the M4x16mm Aluminum alloy screw nuts onthe top of the Orphek ORLED bar light from the side as picture below:
STEP 3 Before attaching the right transparent acrylic vertical tank mount bracket to the OR Bar light, you should put the light power cable through the hole as picture below:
STEP 4 attach the left transparent acrylic vertical tank mount bracket to your
Orphek OR Bar light and place/screw the screws by M4 16mm Aluminum screw
head as picture below:
STEP 5 attach the right transparent acrylic vertical tank mount bracket to your Orphek OR Bar light and place/screw the screws by M4 16mm Aluminum screw head as pic 05 below:
VERY IMPORTANT! Please notice, as we said before that the thickness of
the glass tank can be 20mm maximum!!
STEP 6 attach the clamps on the glass of your tank and fixing the 2 pcs of the
M6 25mm transparent acrylic screws as picture below:
STEP 7 check all the screws are fixed well, and proceed adjusting the height
from the two sides by just loosing the M6 16mm transparent acrylic screws and
adjusting the height then fixing the screws.
IMPORTANT! The maximum adjustable height is 125mm as seen in picture
below:
After finishing mounting you are now ready to turn on your Orphek ORLED Bar light!
If you still have any questions about this product or any Orphek product, don’ t hesitate to contact us at contact@orphek.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>