DONGGUAN G A TRADING TAION0628 Taion BL Module User Manual
- June 6, 2024
- DONGGUAN G A TRADING
Table of Contents
**DONGGUAN**
**Dongguan Like Electric Heating Technology Co., Ltd. manual**User Manual
Product name|
Specification|
customer name ---|---|---
product name| specification| Customer Name
TAION EX-01| | DONGGUAN G.A TRADING
CO.LTD
Product Image| Product parameter
| constant voltage system (V;)| | Resistance range ( Ω)| 2. 7+0. 2 0 (
Ω)
Production process| Thermal
pressures
Switch part number| K025
F
U S
N W
C I
T T
I C
O H
N| Press the ON/OFF button for 2seconds until the LED is red and starts
blinking. meanwhile, the module is kept heating for 5minutes.
After 5minutes of heating. the LED is turned to white from blinking red
automatically unless users push the button.
If users push the button either during or after 5minutes of heating time.
firstly LED is turned to red is the high-temperature mode. secondly LED is
turned to white is the mid-temperature mode. thirdly LED is turned to bule is
the low-temperature mode. Output Heating % of LED red blinking is 100%. LED
red is also 100%. LED white is 70% and LED blue is 38%.
Pressing the ON/OFF button for another 2 seconds while any mode is working. it
will be turned off.
OTHE
RS| 1. Checking the sewing process and thread ends of the heating
module.
2. Checking the exposure of copper wire and damaging each electric cable.
3. Checking the short circuit and any other defects after charging 1hour.
| | | | |
FCC Statement：
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
Documents / Resources
|
DONGGUAN G A TRADING TAION0628 Taion BL
Module
[pdf] User Manual
TAION0628, 2AYX2-TAION0628, 2AYX2TAION0628, TAION0628, Taion BL Module
---|---