ALCYON Java Original 6 Ultrasonic Aroma Diffuser User Guide
- June 15, 2024
- Alcyon
Table of Contents
JAVA Ultrasonic Aroma Diffuser
PRODUCT WARNING
- Do not lean diffuser during operation.
- Unplug from mains power when filling or cleaning.
- Do not empty water from the side which the air vent is located.
- This appliance is not intended for use by children.
- If the diffuser is accidently knocked over during
operation, water may enter the internal space.
If so, please unplug the diffuser, empty any remaining water and allow to dry for 3 days.
If any issues arise please contact your local retailer.
FUNCTION
Introducing the JAVA Aroma Diffuser: Technology meets Tranquillity to provide
you with aromatherapy, calm and soothing illumination all at once.
Utilising the instantaneous benefits of ultrasonic vibrations and Himalayan
salt, purify and revitalise any home with the next step in holistic wellness.
JAVA is the perfect result that two pefect worlds collide!
SETUP
Setting Up
- Choose a location for the diffuser on a hard, stable surface near a wall socket, and away from wind, heat and water.
- Plug the pin of the included power adapter into the Power Port on the back of the diffuser. Plug the other end into a wall socket.
- Pull out the Himalayan salt drawer and carefully place the included Himalayan salt rocks in the drawer. Close the drawer.
Note: When not in use, it is recommended to keep the Himalayan salt rocks sealed in a plastic bag to protect them from moisture.
OPERATION 1
- Place diffuser on a flat and even surface, clear of any loose or foreign objects.
- Fill water tank to max level line – 150ml.
- Replace cover and connect power.
- Add up to 4-6 drops of essential or fragranced oils.
- Press the Power Button to activate.
Diffuser Operation
Power Button| Diffuser| LED Light| Salt Lamp
First| Off| Off| On
Second| On| On (Colour Changing)| On
Third| On| On (Fixed Colour)| On
Fourth| On| Off| Off
Fifth| Off| Off| Off
Product Name:| JAVA Aroma Diffuser
---|---
Voltage:| DC 24V
Power:| 20 w
Water Capacity:| 150 ml
Mist Output:| 25 ml/h
Duration:| 6+ hrs Constant
Salt Malp:| Amber Colour
LED Effect:| Colour Changing or Fixed Colour modes
MAINTENANCE
To keep your diffuser in great working order, we recommend using Alcyon
Diffuser Cleanser to to clean regularly.
Alcyon Diffuser Cleanser – Revive and restore your diffuser like new. Most
manufacturers recommend cleaning your diffuser every few weeks to remove
impurities. Run for a 2-hour cycle and eliminate all the residual sediment and
harmful particles left over from essential oils which impairs mist output and
therapeutic performance. Alcyon Diffuser Cleanser makes it easy to keep your
diffuser working like new so you can enjoy all its health beneffts and get the
full effect and pleasure from essential oil and aromatherapy.
To purchase please visit:
www.alcyon.com.au Directions:
Pour 50 to 100ml of diffuser cleanser into water tank of diffuser depends on
its size.
Run diffuser for 2 hours or until all cleanser in the tank has been diffused.
Remove any excess cleanser and rinse water tank thoroughly then wipe it clean
with a soft cloth.
Resume normal use as per manufacturers operating instructions.
Ingredients:
Aqua, Potassium Lauroyl Sarcosinate, Potassium Cocoyl Glycinate, peg-6
Caprylic/capric Glycerides, beta-glucan, Dmdm Hydantoin, aroma
Caution:
For external use only. In case of contact with eyes, flush thoroughly with
water. If eye irritation persists, get medical attention.
TROUBLESHOOTING
Symptom | Possible Cause | Solution |
---|---|---|
NO MIST | Power not connected | Plug in power adaptor and press mist button to |
activate
Insufficient water| Fill tank with water
Too much water (300m1+)| Tip out excess water
The mist outlet blocked by water droplets or oil build-up| Clean outlet vent
cotton tip
Poor performance due to dirty| Clean ultrasonic pad
Cover not seated or sealed properly against base unit| Reseat cover
WARRANTY CARD
All Alcyon Ultrasonic Diffusers are covered by a limited one year warranty
from date of purchase.
Date of purchase: / / ____ (please keep your receipt with Warranty
Card as Proof of Purchase)
Should you be experiencing any issues with your diffusers, please visit
www.alcyon.com.au or call 1300 882 332. (please
have your diffuser on hand when calling)
Terms and Conditions:
– A dated receipt is required as Proof of Purchase for warranty purposes.
– This warranty is for operational faults only, and does not cover issues such
as breakages or faults arising from misuse.
– Any returned items from customers to Alcyon will be at the consumer’s
expense and must be accompanied with a RA (Return Authorisation) number issued
by Alcyon. Unless a prior arrangement has been made.
– Any goods received without a RA number will not be accepted and returned to
the sender.
– The determination of faults is at the discretion of Alcyon Australia, with
the item to be either repaired or replaced.
– Return shipping from Alcyon to the customer is to be at Alcyon’s expense.
Alcyon Australia
PO Box 50
LINFIELD NSW 2070
1300 882 332
info@alcyon.com.au
www.alcyon.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>