Tronsmart T6 PRO Bluetooth Speaker User Manual

June 6, 2024
Tronsmart

T6 PRO
BLUETOOTH SPEAKER
USER MANUAL

BUTTON CONFIGURATION

HOW TO USE

HOW TO CONNECT TO TWS MODE?

INDOOR

OUTDOOR

Thank you for purchasing the Tronsmart T6 Pro Bluetooth Speaker. Please read the user manual before use and keep it handy for future reference. If you have any additional questions or comments, please contact us by email at: support@tronsmart.com

PACKAGE CONTENTS

1 x T6 Pro Bluetooth speaker
1 x 3.5mm audio cable
1 x Type-C charging cable
1 x Warranty card
1 x User manual
1 x Lanyard
Aux-in Mode
Simply connect the speaker with your non-Bluetooth device via the 3.5 mm audio jack cable.
Note: After plugging in an audio cable, the speaker will automatically switch to Aux-in mode.
TF Card Slot Mode
The speaker will play the music from your TF/Micro SD card when plugging the card into the slot.
Bluetooth or does not play any sound after pairing. When in low battery, the speaker will.

Care & Maintenance

Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable. Do not disassemble this product. It contains no user-serviceable parts. Do not drop or jump on it and treat it with care for the best performance. Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the batteries may explode or leak.
Warranty Information
Your ‘Tronsmart Pro Bluetooth Speaker’, is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.

Model T6 Pro
Bluetooth 5.0
Bluetooth profile A2DP V1.3, ACRCP V1.4, HFP V1.6
Audio decoding SBC/MP3
Bluetooth transmission Up to 25m/82ft (open area)
Li-battery Capability 7.4V 5200mAh*2
Power 45W
Waterproof IPX6
Power supply DC 5V/3A, via Type-C port
Frequency range 20Hz – 16000Hz
Playtime Up to 24 hours (on a 50% volume)
Standby About 24 months
Charging time About 3-4 hours
Dimension 3.27 x 9.13 inches / 83 x 232 mm
Weight 870g

FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver connected.
–Consult the dealer or an experienced radio/TV technician for help could void the user’s authority to operate the equipment.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
19th Floor, Galaxy World Tower B, #1 YaBao Rd.,
LongGang District, Shenzhen, China
Email: support@tronsmart.com
800-270-1082 (USA&Canada)
+86-755-23603740 (Global)

www.tronsmart.com
Made in China
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals