Nie Tech WF37 Wi-Fi Plug Instruction Manual
- June 6, 2024
- Nie Tech
Table of Contents
Nie Tech WF37 Wi-Fi Plug Instruction Manual
Note: Do not plug an extension cord into the GM-7
Note:
Your device may need to be within 100 feet of the controller to be included.
If so, include the device to the network within 10 feet of the controller and
relocate it to the desired position in your home. Be sure to refresh the
network if the device is included in this manner.
APP Connection
Note:
Your device needs to be installed in the network coverage of your home router.
-
Please scan the QR code to download the application “Smart Life”.
-
If you cannot download Smart Life app, please search “Smart Life” on Google Play (for Android phone) or Apple Store (for iOS phone) to download.
After you download the Smart Life App and register a new account, please follow the instructions below to set up your smart switch. -
The smart switch can be also used with Amazon Echo and Google Home. Please scan the QR code below and follow the instructions if you have any trouble pairing with them.
Introduction
The illuminfx GM-7 is an enabled 16A outdoor smart plug designed for use for
most residential lighting and motor applications. It’s compatible with LED,
halogen, incandescent, xenon, fluorescent and compact fluorescent bulbs. Works
with Amazon Alexa, Google Assistant, and many other apps.
With the GM-7, you can use , or voice the free Smart home App, control by
Alexa and Google Assistant to operate your devices in home.
Specifications
Power: 120V AC, 60Hz
Total (Both Outlets): 10 Amps x 2
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Total Max Load: 16A
When the white LED is flashing slowing (AP mode), please hold the button 5 seconds until the LED switches to rapidly blinking–Back to EASY MODE.
Note:
- Our products support Bluetooth quick-fit and 2.4GHz Wi-Fi network.
- 3 connection network modes: Bluetooth quick-fit Mode, Easy Mode, AP Mode. Choose the most suitable mode to configure the network.
- Please operate quickly when the white LED indicator blinks rapidly.
- When indicator flash enters the network, complete standard operation within the 3 minutes.
- If you failed to connect with Wi-Fi network, please try to operate several times more.
Bluetooth quick-fit Mode
Easy Mode
CAUTION – PLEASE READ!
This device (GM-8) is intended for installation in accordance with the
National Electric Code and local regulations in the United States, or the
Canadian Electrical Code and local regulations in Canada. If you are unsure or
uncomfortable about performing this installation consult a qualified
electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment.
This device should never be used to control the On/Off status of Medical
and/or Life Support equipment.
OTHER WARNINGS
Risk of Fire
Risk of Electrical Shock
Risk of Burns
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.