FRESH N REBEL 200401 Twins 2 Tip True Wireless Bluetooth Earbuds User Guide
- June 6, 2024
- FRESH N REBEL
Table of Contents
FRESH N REBEL 200401 Twins 2 Tip True Wireless Bluetooth Earbuds
FIRST TIME PAIRING
Press and hold the reset button for 5 seconds before connecting your device
for the first time to your Twins2 (Tip).
After resetting, simply open the charging case, turn on Bluetooth on your
device and wait 5 seconds. The Twins2 (Tip) will appear on your device and you
can connect via Bluetooth. Every next time you take the earbuds out of the
charging box, they will automatically turn on and connect to your phone within
seconds. When you put them back, they will disconnect and turn off.
TOUCH CONTROLS
LED BEHAVIOUR
Earbuds
-
Blinking very slowly
Connected -
Blinking
Earbuds are reconnecting to each other -
Blinking very fast
Searching for connection
Case (outside)
-
Blinking very slowly
charging with cable or wirelessly -
Off
done charging/not charging
Case (inside)
-
Battery indicator:
- LED
- blinking Case needs to be charged
- 0-25% Battery remaining in case
-
LEDs
25-50% Battery remaining in case -
LEDs
50-75% Battery remaining in case -
LEDs
75-100% Battery remaining in case
FEATURES
Total playtime: At average use for music and phone calls at 50% volume.
Recharging case:
Wired & wireless charging USB-C cable included. Charging pad not included.
FAQ
What is Double Master?
- The Double Master functionality means that both earbuds have a built-in microphone, so you can use the earbuds individually (either the right or the left one) or both of them as a pair for stereo sound.
- Single Master means you can use only the right earbud individually or the right and left earbuds together. You can never use the left earbud separately from the right earbud.
I can’t seem to get touch control to work, what should I do?
- Aim for the LED and try touching with a bit more force.
My earbuds don’t turn off automatically when I put them back in the charging case, what can I do?
- Is 1 LED blinking inside the charging case? Then the battery level of the case is too low to connect to the earbuds and automatically turns them off. Charge the case and the issue will be solved.
One of my earbuds doesn’t work anymore, what can I do?
- Put the earbuds back in the charging case, close the case and wait 10 seconds before trying again.
How can I reset my Twins2 (Tip)?
- Hold the reset button until the outside LED is blinking 3 times. Your Twins2 (Tip) will reset.
Hereby, Sitecom declares that this radio equipment is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.freshnrebel.com
Operating frequency band: 2400 to 2483.5 MHz. Maximum radio-frequency power
transmitted: 4.6 dBm / 5 mW
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>