Shenzhen Qingtuo Technology PL001-PL008 Smart Light Panels User Manual
- June 6, 2024
- Shenzhen Qingtuo Technology
Table of Contents
Shenzhen Qingtuo Technology PL001-PL008 Smart Light Panels
Basic Parameter
- CCT: 2700K-6500K
- Energy Consurrp lion Per Panel: 2 W
- Max PanelsP er Controller: 1-12 PCS
- Power Supply Power : 24W
- Max Panels per Controller: 1-18 PCS
- Power Supply Power: 36W
- Dimmability: Yes(Via App or Voice)
- Compatibility: Google Assistant, Amazon Alexa, IFTTT, Siri
- Housing Materials: PC w/t V2 Fire Rate
- Working Temp: -4 °F -104 °F(-20°C-40°C)
- Voltage: 100 V-240 V(Universal)
- Color Channel: RGBW
- Communication Protocol: WiFi+ Bluetooth (2.4Ghz b/g/n)
- Lifespan: 25,000 hours.
- Max Colors: 16. 7 M +
- Certifications: FCC PROP65 CE PAHs ROHS
The arrow on the linker points to the controller
Instruction Manual for Controller Function
- Long press the button for a bout 10 seconds when the light is onto enter the distribution network state.
- Turn on/off three times can also enter the distribution networ kstate.
Note: if the panel is red color and no response, please power off once
Operation steps of mobile APP connection
- Download APP from store or website
- OPen WIFl(2.4Ghz) and Bluetooth, enter APP, and perform operations
Instruction Manual for smart Light Panels to prevent your light panels from falling off the wall, please pay attention to installation matters.
- Please make sure that the wall or other installation surface is clean and free of dust or water
- Use at least 1 pieces of double-sided adhesive mounting tapes for each light board water
- When installing the light panels, be sure to press it hard for 30 seconds after sticking to the wall to ensure stability
- Note: The double-sided adhesive mounting tapes that comes with the product is not suitable for brick walls, wallpaper, wooden boards, ceilings, walls with ash falling and other uneven surfaces
Safety Precautions
- Do not use double-sided adhesive mounting tape to fix the light panels on the routh walls, wallpapers. brick walls, gray walls. and uneven walls;
- Do not use double-sided adhesive mounting tape to fix in humid environments (tiles in bathrooms, toilets,etc.);
- Do not install the product on the ceiling without a reinforcement kit to prevent it from falling.
- Double-sided adhesive mounting tapes is not strong enough to fix the light board on the ce1lhng;
- Do not use metal or conductors to approach any exposed parts, such as controller connectors, power connectors. linkers and slots on the back of the light panels;
- The product is not waterproof. please do not wash or touch the water;
- Do not leave the power cord idle on the ground to avoid stumbling;
- Children who are not supervised by adults are not allowed to use this product along If some parts of this product are imported. there is a risk of choking.
RF Exposure Statement:
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator and
your body.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.