Marshall MINOR III True Wireless Earbuds User Manual
- June 6, 2024
- Marshall
Table of Contents
MINOR III – TRUE WIRELESS
FULL USER MANUAL
GETTING STARTED
- Open the charging case.
- Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
- Select MINOR III from your sound device’s Bluetooth® list.
TOUCH CONTROLS
Touch the left or right earbud to control your music and phone calls.
- 1 touch to play/pause or receive/end a call
- 2 touches to skip forward or reject a call
- 3 touches to skip backward
CHARGING THE EARBUDS
Put your earbuds back in the case and close the lid to turn them off and begin charging.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The case is fully charged when the front-facing LED is steady green.
To charge the case using a wireless charger, follow the instructions below.
- Place the charging case with its back flat against the wireless charging pad.
- Make sure that the front LED lights up to indicate that the case is charging.
- Once the LED light has turned steady green the case is fully charged.
LED INDICATOR
The LED shows the case battery charge, from red through yellow to green (0–100%). It pulses blue while in Bluetooth pairing mode.
PAIRING A NEW DEVICE
Minor III remembers up to 6 previously paired devices and will try to reconnect with the last connected device.
- Place the earbuds in the case and keep the lid open.
- Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
- Select MINOR III from your sound device’s Bluetooth list.
Note: Minor III can be connected with one sound device at a time. Make sure to disconnect from the current device before reconnecting with a different device.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, follow the instructions below.
- Place the earbuds in the case and close the lid to restart the earbuds.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and the earbuds will need to be
paired again.
- Place the earbuds in the case and keep the lid open.
- Press and hold the Bluetooth pairing button for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
- Remove MINOR III from your sound device’s Bluetooth list before pairing again.
If the problem persists, perform a hardware reset.
Note: This will delete all user settings and the earbuds will need to be
paired again.
- Place the earbuds in the case and keep the lid open.
- Press and hold the Bluetooth pairing button for 15 seconds to reset the earbuds.
- Remove MINOR III from your sound device’s Bluetooth list before pairing again.
Marshall is a trademark of Marshall Amplification Plc. Permission granted.
Design of product and packaging are intellectual properties of Zound
Industries International AB, Centralplan 15 111 20 Stockholm, Sweden. © Zound
Industries International AB. All Rights Reserved.
The Bluetooth® wordmark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Zound Industries
International AB is under license.