Verbatim VAPPP123 Wireless Charging User Manual
- June 6, 2024
- Verbatim
Table of Contents
Verbatim VAPPP123 Wireless Charging
Introduction:
Thank you for choosing this Verbatim product. Please read this manual carefully prior to use so as to fully understand the product and its correct usage.
- Type C Port (Input: Max. 18 W / Output: Max. 12 W) -Use to recharge power pack and charge other devices.
- Wireless Charging (Max. 7.5W)-Use to charge iPhone 13/ iPhone 12,AirPods, Smartphone.
Caution:
- When used correctly, lithium-ion and lithium-polymer rechargeable batteries provide a safe and dependable source of portable power. However, misuse & abuse may result in leakage, fire, burns, explosion/disassembly causing personal injury or damage or defects to other devices.
- Do not alter, modify or disassemble the charging device. There are no user-serviceable parts inside, and incorrect reassembly may result in shock or fire hazard.
- Do not drop or subject the charging device to strong mechanical shock.
- Keep the charging device away from heat sources, direct sunlight, combustible gas, humidity, water or other liquids.
- Do not insert any objects into the ports or openings of the charging device.
- Do not operate the charging device if it has been dropped or otllerwise damaged in anyway.
- The charging device will generate heat with charging. Always charge in a well ventilated area. Do not charge under pillows, blankets, on flammable ° °surfaces, or in environments where the temperatures exceed 35 C/95 F.
- Keep out of reach of children.
- To reduce the risk of electric shock, unplug the charging device from any power source before attempting maintenance and cleaning.
- Do not short-circuit tile charging device or store it in a receptacle where it may be short-circuited by other metallic or conductive objects.
Package Contents:
- 1 x Power Pack
- 1 x Type C to Type C Cable
- 1 x Metallic Ring
Specifications:
- Battery type: Li-Polymer
- Operating temperature: 0°c – 35°c
- Cycle time: Above 500 cycles
- Size: 112.3 x 67.2 x 12.4mm
- Weight: 139g
Input & Output Specifications:
- lnput: Type C- 5v
3A, 9V 2A (Max. 18W) - .Output: Type C – 5 V 2.4 A (Max. 12 W)
- Wireless charging – 5 W, 7.5 W.
- Total: Max. 12 W
When more than one output is being used concurrently, the total maximum output is 12 W being shared among the output ports
Charging the Power Pack:
- Connect the Type C side of the supplied cable to the Type C port on the power pack.
- Connect the other Type C side of the supplied cable to USB AC adaptor. (eg: USB AC adaptor supplied with your Smartphone).
- The White color LED power status lights display the battery level. When fully charged, all four LED lights will be on.
- The LED lights switch off automatically when the charging cable is unplugged.
Wireless Charging
- •Press the power button to activate the power bank for wireless charging.
- White LED power indicator and Red wireless charging indicator will turn on.
- Place compatible wireless charging device on the charging pad. A flashing Red LED light indicates that the device is charging.
- Supports iPhone 13/ iPhone 12 MagSafe wireless charging system.
Wireless Charging indicator
Red LED light “On” – Standby mode
Red LED light” Flashing” – Charging mode
Charging Smartphones, Tablets and Other Devices:
- Connect your devices to the power pack via your device’s regular charging cable plug it into the Type C port on the power pack.
- The LED Power Indicator will turn on.
- The LED Power Indicator will switch off automatically when the charging cable is unplugged.
LED Indicators:
A flashing white LED light indicates that the power pack is charging. Its
position indicates the overall charge percentage with each light representing
25%. The battery is fully charged when all four lights are on.
White LED Indicators indicate remaining charge.
-
4 White LED Lights – Fully Charged
-
3 White LED Lights – 75% Charge remaining
-
2 White LED Lights – 50% Charge remaining
-
1 White LED Light – 25% Charge remaining
-
Metallic Ring:
The metallic ring provided can be attached to any other brand of phone to utilise the MagSafe equivalent capabilities. -
Device Disposal:
Please observe local laws when disposing of electronic devices and batteries.
Verbatim Australia Ply Ltd (ABN 39 005 706 37 4)
Warranty Statement
Our goods come with guarantees that cannot be exclude under tlie Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Verbatim Australia Ply Ltd (ABN 39 005 706 374) (“Verbatim”) provides the
following warranty in relation to its goods (“Product”).
The benefits of this warranty are in addition to any rights and remedies
imposed by Australian State & Federal legislation that cannot be excluded.
Nothing in this warranty is to be interpreted as excluding, restricting or
modifying any State or Federal legislation applicable to the supply of goods
and services which cannot be excluded, restricted or modified.
Verbatim warrants that, subject to the exclusions and limitations below, the
Product will be free from defects in materials and workmanship for the period
specified on the product packaging and/or the website from date of purchase.
If a defect appears in the Product before the end of the warranty period and
Verbatim finds the Product to be defective in materials and workmanship,
Verbatim will at its own discretion repair or replace the Product free of
charge. If goods presented for repair are capable of retaining user-generated
data, repair of these goods may result in loss of the data.
Proof of Purchase
Proof of purchase shall be required to be eligible for this warranty and to
establish the commencement date of this warranty. This warranty is valid for
the original purchase only and is not transferrable to a subsequent customer
if the Product is sold by the original customer during the warranty period.
The term of your warranty period shall commence from the purchase date
appearing on your purchase receipt from an authorised distributor, reseller or
retailer and extends only for the time set forth in the Product documentation.
This information can be obtained from the packaging and/or the Verbatim
Australia website.
Returned Merchandise Authorisation
No product may be returned to Verbatim Australia without first contacting
us for a RMA (Returned Merchandise Authorisation) number. If it is determined
that a Product may be defective, you will be given an autlmrisation number and
instructions for Product return. An unauthorised return, i.e. one for which an
RMA number has not been issued, will be returned to you at your expense.
Authorised returns are to be shipped prepaid and insured to our Head Office in
qualified packaging.
Warranty Claims
- If a fault covered by warranty occurs, the customer must first:
- Contact Verbatim Australia Head Office using tlie contact details provided below; or
- Return the Product to the retailer from which the Product was purchased.
- Any warranty claim must be accompanied by:
- Proof of purchase; and b)Full details of the alleged defect.
- If Verbatim or the retailer from which the Product was purchased finds no defect in the Product after inspection and testing, the customer must pay Verbatim’s usual costs of service work and testing.
- The customer must bear the cost of the transport to Verbatim or to and from the retailer to make the warranty claim including all insurance of the Product. Verbatim will bear the cost of the return transport to the customer once the claim has been finalised.
Exclusions
The warranty will not apply where:
- The Product has been repaired, altered or modified by someone other than Verbatim or an authorised repair agent;
- The alleged defect in the Product is within acceptable industry variances;
- Verbatim cannot establish any fault in the Product after testing and inspection;
- The Product has been used other than for the purpose for which it was designed;
- The defect in the Product has arisen due to the customer’s failure to properly use and maintain the Product in accordance with Verbatim’s instructions, recommendations and specifications (including applicable maintenance schedules);
- The Product has been subject to abnormal conditions or use, including environment, temperature, water, fire, humidity, pressure, stress or similar;
- The defect has arisen due to abuse, misuse, neglect or accident.
The warranty does not extend to:
- Damage or defects caused by normal wear and tear;
- General, consequential, punitive, incidental or special damages. These include loss of recortled data, interruption of use, the cost of recovery of lost data, lost profits and the cost of the installation or removal of any Products, Ille installation of replacement Products, and any inspection, testing or redesign caused by any defect or by the repair or replacement of Products arising from a defect in any Product.
- Incompatibility or poor performance due to specific computer or hardware used.
Limitations
Verbatim makes no express warranties or representations other than set out in
this warranty.
The replacement of the Product or part of the Product is the absolute limit of
Verbatim’s liability under this express warranty.
Contact Details
Verbatim Australia Ply Ltd
Unit 6, 450 Princes Highway, Noble Park, Victoria 3174, Australia
Tel: +61 3 9790 8999 Fax:+61 3 9790 8955
Email: support@verbatim.com.au
Website: www.verbatim.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>