MOSSLO MMSL-M2020Q Magnetic Wireless Power Bank Instruction Manual

MOSSLO MMSL-M2020Q Magnetic Wireless Power Bank Instruction Manual

Features:

1. Powerbank ON/OFF Button
2. Type-C Input/Output
3. Lightning Input
4. LED Indicator
5. Wireless Charging Surface
6. Magnet Ring

What’s included:

1 x 5,000 mAh Wireless Power Bank
1 x Type-C to Type-C charging cable
1 x Instruction Manual

Tech Specifications

• 5000mAh/3.7V/18.5Wh
• Lightning Input: DC 5V/1.5A
• Type-C Input/Output: DC 5V/1.5A
• Wireless Output: 5W

LED Indicators

• Press the Powerbank ON/OFF Button(1) once to view the remaining power capacity.
• Press the button twice to turn OFF.

INSTRUCTIONS:

1. Charging the PowerBank:
   ♦ Charge the powerbank fully before usage.
   ♦ Connect the provided charging cable to a power source and to the Type-C Input port (2) or Lightning Input(3) on the powerbank.
   ♦ Once connected the LED Indicator(4)will begin to flash white when charging.
   ♦  Once fully charged LED will stop flashing
   

2. Charging Electronic Devices with the Power Bank:
   ♦  Connect the charging cable to your mobile phone/device using the appropriate connector.
   ♦  Connect the Type-C part of the cable to Type-C Output(2), the LED Indicator will illuminate when charging.
   ♦  Remove the charging cable from your mobile device when fully charged.
   

3. Charging Electronic Devices with the Wireless Charging:
   ♦  Press Powerbank ON/OFF button(1) LED indicator will show Green once the powerbank is in wireless charging standby mode.
   ♦  Place wireless charging enable device on Wireless Charging Pad(5). The device will begin to charge, LED indicator will turn RED when charging.

**Note: If the LED indicator is flashing RED an unknown object is being detected between the wireless charging pad and the phone by FOD(Foreign Object Detection). (The device will not begin to charge until object is removed.)

SAFETY PRECAUTIONS:

♦ WARNING-When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C).
3. Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
4. The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
5. To reduce the risk of injury, close supervision is required when the product is used near children.
6. Do not expose the device to moisture.
7. Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.
8. Do not use the device if damaged or modified.
9. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
10. Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
11. Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F (40°C) may result in explosion.
12. To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
13. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.

Please remove attachments from the phone before charging on this device.

FCC Caution

MADE IN CHINA

Documents / Resources

| MOSSLO MMSL-M2020Q Magnetic Wireless Power Bank [pdf] Instruction Manual
MSL-M2020Q, MSLM2020Q, 2AN8FMSL-M2020Q, 2AN8FMSLM2020Q, MMSL-M2020Q, Magnetic Wireless Power Bank
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>