Alco Electronics CT9F08 Tablet User Guide
- June 6, 2024
- Alco Electronics
Table of Contents
Electronics CT9F08 Tablet
User Guide
What’s in the box
Get to know your Tablet
Charging the battery
Use ONLY the included AC Adapter to charge the battery.
Charging time will vary depending on the remaining battery life. Charging from
0% should take approximately 4-5 hours. You may not be able to turn on your
tablet for at least 30 minutes if the battery was fully drained.
IMPORTANT! Please Read.
We recommend fully charging your tablet before using it for the first time.
For optimum performance, please connect the provided AC adapter to your tablet
when it falls below 20% charge.
Get Started
Press and hold the button 4~5 seconds until the logo appears.
FOR SUPPORT AND SERVICE, PLEASE CONTACT US https://www.1800customersupport.com/
Starting for the first time
When using the tablet for the first time, you will be required to set up the following:
|
|
---|---|---
Select the language, then tap START.| Set the Wi-Fi.
Tap a network name to see more details or connect to it, and enter a password
if necessary.| When prompted, sign in using the email address and password for
your Google Account. If you don’t have one yet, go ahead and create one.
Reading the Disney ebooks
-
Select the ebook on the home screen by:
A. Tap on the Disney Books icon.
B. Tap on the ebook directly. Swipe up or down to select other ebooks.
-
Press to select the ebook you want to read.
-
Press one of the below to start reading.
Change the wallpaper on the screen
Hey Kids!
-
Tap anywhere on the home screen.
-
Tap on the WALLPAPERS to select a new one.
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. -
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus. -
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
ADDITIONAL SAFETY INFORMATION
- The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Always leave sufficient space around the product for ventilation. Do not place the product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings.
- Do not place lighted candles, cigarettes, cigars, etc. on the product.
- Care should be taken so that objects do not fall into the product.
- Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.
- To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Do not play your headset at high volume. Hearing experts warn against extended high-volume play.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214, Lockport, NY, 14095, Tel: 716-240-0902) could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
CAN ICES-3(B) / NMB-3(B)
This device complies with Industry Canada License-exempt RSS Standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Caution: Exposure to Radio Frequency Radiation.
To comply with the Canadian RF exposure compliance requirements, this device
and its antenna must not be co-located or operated in conjunction with any
other antenna or transmitter.
To comply with RSS 102 RF exposure compliance requirements, a separation
distance of at least 0cm must be maintained between the antenna of this device
and all persons.
Operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
For the frequency 5600-5650 MHz, no operation is permitted.
Warning: the AC adapter is used as a disconnect device and it should
remain readily operable during intended use. In order to disconnect the mains
plug from the mains completely, the AC adapter should be disconnected from the
mains socket outlet completely. The socket outlet shall be installed near the
equipment and shall be easily accessible.
**Printed in China
810-9F0895Wxxx**
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>