Fengniu Toys Factory MT1061 Spray Car Instruction Manual

June 6, 2024
Fengniu Toys Factory

Fengniu Toys Factory MT1061 Spray Car Instruction Manual

Fengniu Toys Factory MT1061 Spray Car Instruction Manual - Product
Overview Fengniu
Toys Factory MT1061 Spray Car Instruction Manual - Product
Overview

ATTENTIONS

Do not play on the road or in a dangerous place.
Do not play the car in a place where it could easily get wetted.
Do not play the car on sands or other uneven surfaces or in a place with too much dust.
Do not put your face near the wheel while it is spinning in case of spotted.
Do not play on the carpet in case of malfunction with enlaced fur.

BATTERY TIPS(SHOULD BE OPERATED BY ADULT)

  1. The car use 3.7V lithium battery pack, remote controller use 2(M size)batteries.
  2. The switch on the bottom of the car should turned’ OFF’ when is charging.
  3. Optimum charging time is 3-4 hours.
  4. Pay attention to the electrodes ‘+’ and ‘ -‘ when install the batteries in the car and controller.
  5. Using special charger produced by our company is strongly recommended; charging with any other uncertain charger may destroy the circuit of the car and batteries.
  6. Take out battery from the car if not playing it for a long time.

Fengniu Toys Factory MT1061 Spray Car Instruction Manual - SPRAY
Function

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals