Shenzhen Flashine Lighting Q103 LED Bedside Lamp User Manual
- June 6, 2024
- Shenzhen Flashine Lighting
Table of Contents
Q103 LED Bedside Lamp
User Manual
Main Features
- Support Gesture/App/Voice control
- Stepless dimming & CCT adjustable
- Memory of brightness & CCT
- Magical LED mood light
- Double PC cover
- One touch night light
Package Content
| 1x LED Bedside Lamp | 1x User manual |
|---|---|
| 1x Adapter (DC12V, 1A) | 1x Warm reminder card |
Product Diagram
Specification
| Power | 10W |
|---|---|
| LED type | 42pcs SMD2835+21pcs RGB |
| Color temperature (CCT) | 2200K/4000K/6000K(CCT adjustable) |
| Dimming mode | Stepless dimming control |
| Dimming mode | Stepless dimming control |
| Light mode | White mode/RGB mode/Colorful mode |
| Adapter specification | Input: AC100-240V; Output: DC12V, 1A |
| Wireless connection | Wi- Fi 802.11 b/g/n 2.4GHz ＆ BLE |
| Supported system | Android & iOS |
| Materials | PC+ABS |
| Color | White |
| Lamp size | Φ160*H125mm |
| Operation mode | Manual/App/Voice control |
How to use
1. Manual control mode
LED night light
Press once the button to turn on/turn off LED night light, and waving your
hand on the top center of PC cover also can turn on/turn off it.
LED main light
Wave your hand on the top center of PC cover to turn on/turn off LED main
light. Pressing once the button also can turn on it. (The sensing distance is
0~15cm.) Put your hand on the top center of PC cover to adjust the brightness,
Then remove your hand and put your hand on the top center again to adjust the
brightness accordingly.
Press once the button to adjust the CCT, click in turn to switch 2200K/4000K/ 6000K.
RGB mode light
Press once the button to turn on RGB mode red, Click in turn to switch between
red, orange, yellow, green, cyan, blue, and purple.
Colorful mode
Press once the button to turn on Colorful mode, Click in turn to switch
between Colorful, Dazzling, Gorgeous, Blue SKY, Ocean, Sunflower, Forest.
2. APP control mode
2.1 Download the App:
Download the “Smart Life” App by scanning QR code or from App Store/Google
Play on the mobile phone with Android/iOS system.
2.2 Register & login the App:
Use your mobile phone number to register and login “Smart Life” App.
2.3 Pair the lamp:
In the standby status, long press the button for 10 secs to enter pairing mode
until the White mode light keep flashing. Then open the “Smart Life” App, and
follow the instructions to pair the lamp: Home–Add Device–Lighting–Lighting
Confirm light blinks repidly–Choose network & Enter WiFi password–Completed.
(During setup, make sure the mobile phone has connected to 2.4GHz WiFi, not
5GHz.
If pairing failed after 3 minutes, please follow the above steps to pair the
lamp again.)
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>