Shenzhen Xintu Century Technology XT16 ANC Bluetooth Headset User Manual

Shenzhen Xintu Century Technology XT16 ANC Bluetooth Headset User Manual

FCC ID: 2AS2T-XT16
NOTE: LABLE is too large to be printed on the product, so it is printed in the and User Manual

Charging

• Earphone charging: When the earphone prompt “Battery low”. Please put the earphones into the charge case, it automatically turn off and charging.
• Charge case charging: The charge case is LED power display. Please use the qualified  charging cable provided by the manufacturer  to charge.

Where to see the power display?

After the earphone have connected with the phone, there is a battery mark next to the Bluetooth or earphone symbol to display the  battery level.

Dual earphones mode

Method one.
After fully charged,opening the cover,not need remove the earphones will turn on automatically, waiting about 5 seconds, the red and blue lights flash, turn on Bluetooth on the phone, search for the pairing name “XG-5.0” and click to connect.

Method Two
After fully charged, take the two earphones and touch about 5 seconds, .the red and blue lights flash, turn on Bluetooth on the phone, search for the pairing  name” ‘XG-5.O” and click to connect

Single earphone mode

After fully charged, take the two earphones and touch about 5 seconds, the red and blue lights flash, turn on Bluetooth on the phone, search for the pairing name “XG-5.0” and click to connect

Earphone operation function

• Power on: light touch 5 seconds
• Power off: light touch 5 seconds
• Next song: Double touch the right earphone
• Previous song: Double touch the left earphone
• Volume up: Triple touch the right earphone
• Volume down: Triple touch the left earphone
• Answer the call: Light touch any side
• Reject the call: Light touch 2 seconds any side

How to turn on noise

Reduction/transparency mode

1. Transparent mode
   When the headset is turned on or playing music, long press left and right About 2s on either side of the earphone, you hear a beep at the same time Prompt tone to enter transparent mode Prompt tone: transparency

2. Noise reduction mode
   In the transparent mode, long press either side of the left and right earphones About 2s, you hear a beep sound at the same time,Prompt tone: ANC on

3. Turn off noise reduction/transparency mode in the noise reduction mode, long press either side of the left or right for Left and right, when you hear a beep, Prompt tone: ANC off

Reset Bluetooth headset
Put the headset into the charging compartment and close the compartment cover.Wait 3-5 seconds to take out the headset, it will automatically re-pair!

Apple mobile phone can set ANC mode

How to set three modes by iphone?

About Signal

1. Please notice the wearing method, do not cover the earphone by ear to prevent interruption of signal.
2. Do not cover any one earbuds on the dual earbuds mode by hand, or it will result the interruption of signal.
3. Please use this earphone under its working range (10 meters) and for best results avoid obstacles in between the connected devices.
4. On the dual earbuds model, sometimes the connected of “R” maybe interrupted,please check the using condition or the working range.

How to wear the headset

Parameters of earphones:

• Model: XT16ANC
• Version: 5.0+EDR
• Battery voltage: 3.7 V
• Headphone music time: 3-4h
• Earphone talk time: 3-4h
• Charging voltage: DC 5V
• Communication distance: 10m
• Headphone standby time: 120h
• Headphone charging time: 0.8h

Product analysis

Warning

1. Please do not take the earbuds apart and remodel, otherwise, it may cause electrical breakdown by the fire or even completely damage the product.
2. Please do not put the product to too high or too low temperature(Below O°C or above 45°C).
3. Please avoid using the device indicator light near the eyes of children or animals.
4. Please do not use the device under thunderstorms. It may cause the device to malfunction and increase the risk of electric shock.
5. Please do not wipe the product with oil or other volatile liquids.
6. Please do not let the device get wet with liquids.

Note
It may cause hearing damage under longtime using, please arrange the use time reasonably.

FCC STATEMENT

1 . This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>