Skmei 1583 Sport Waterproof Watch Operation Manual

SKMEI 1583 Operation Manual

FEATURES

• Digits LCD Display Display Hour ,Minute ,Second ,Month ,Day, Year and Week
• Dual time display (display both local and second time);
• 12/24hr display;
• Daily Alarm and Chime hourly
• 1/100 second Chronograph with split functions
• Countdown function, to:23:59:59;
• Dual time;
• 3 second EL backlight;
• Year setting; (range: 2000~2049)

FUNCTION

Operation Manual

• At any state ,press A key EL backlight for 3s.
• Press B key function successively:time mode→Daily Alarm→Dual time→Timer→Chronograph;

TIME/DATE SETTING

In the time mode, press and hold C key to time setting state and “Second” flashing

• Press B key to select Settings: second→time→minutes→year→month→day; (note: in any mode of this interface,
• press A key to convert 12/24 hours)

• Press D key to adjust the setting items, press and hold D key to rapidly adjust;
• After setting, press C key exit setting mode.

Daily Alarm Mode

• Press A key to start: daily alarm hourly chime daily alarm and hourly chime;
  

• Press C key to enter alarm setting mode, “hour” flashing;

• Press B key to select the setting items: hour→minute→month→day;

• Press D key to adjust the setting items, press and hold D key to rapidly adjust;
• After setting, press C key exit setting mode.
• Note: default to daily alarm!When set month – day, it means the designated date time ring!

The alarm ring

• When Alarm is ON, the alarm prompt lasts for 10 seconds. Press any key to stop the alarm prompt.

Dual time function and setting

• press C key to enter the second time setting “hour” flashing;
• Press B key to select setting items :hour→minute;

• Press D key to adjust the setting items, press and hold D key to rapidly adjust;
• After setting, press C key to exit setting mode.

Timer Mode

The measurement range of this table is 23 hours, 59 minutes and 59 seconds

• Press C key to enter the setting mode, “hour” flashing;
• Press B key to select Settings: hour→minute → second; (in the setting interface, press A key to turn on or off AUTO AUTO loop)
• When the AUTO cycle function is turned on, the mode will be set before the automatic cycle after the timer is completed. Enter the timer setting item and press A to close the AUTO; (Press D in timer mode to pause timer and then press C to enter the setting item)

• Press D key to adjust the setting items, press and hold D key to rapidly adjust;
• After setting, press C key to exit setting mode;
• Timer alarm sounds for about 10 seconds ,press any key to stop the alarm;
• When stop the alarm, display the timer setting .
• When the timer is stop midway, press A key to return to the setting.

Chronograph

• Press D key to start dual time mode, When stop, press C key to zero.
• During the dual timer, press A key to turn on SPL function, display “SPL” on the screen.press A key to return to the dual timer again.
• When reach the maximum (23 hours, 59 minutes, 59.99 seconds), continue to restart the stopwatch timing from 0;
• Note: ABCD four key to hold down at the same time, will restore factory settings! As shown in the following figure:

Skmei 1583 Sport Waterproof Watch Operation Manual – Optimized PDF
Skmei 1583 Sport Waterproof Watch Operation Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>