KONDATOR 438-LC15 Monitor Arm OSLO User Manual
- June 6, 2024
- Kondator
Table of Contents
User manual
Monitor Arm OSLO
438-LC15
438-LC15B
438-LC15W
Assembly Guide
Before assembly, please spend some time reading this manual and follow the
procedures step by step. Do not discard any of the packagings until you have
checked all the parts and the package of fittings.
if you are missing any of the parts, please contact the seller from which you
purchased your products. The staff will do their best to help you.
Step 2
Place monitor facing downward on flat surface. Place arm and VESA mount on the
monitor back as figure and align to the screw holes. Secure them together with
four
screws. Then tighten them up with a screwdriver (not provided).
Step 3
insert the arm with the fixed monitor onto the pole. Adjust to the desired height using the black plastic lever. To make the first arm completely rigid, use Allen key 08 until the screw grips the pole 02. Using Allen key 05, tighten the remaining joints to achieve the same result.
Caution
- There are many components used in the construction of this unit.
- These loose items should be kept away from young children while assembling your unit.
- Please consult authorized service personnel for the installation of this unit.