KONDATOR 935-PM50 Built-in Power Socket Installation Guide

KONDATOR 935-PM50 Built-in Power Socke

INSTALLATION INSTRUCTION

• A- Installation into a round hole
  B- Installation into a tailored hole

CONTENT

• 1A

  • DRILL

• Drill a hole in the table.

• 2A)

• INSERT Insert Powerdot into the hole and feed the power plug through the table and the plastic fastening nut.

• 3A

• TURN CLOCKWISE& PLUGIN Turn the plastic fastening nut as far up the thread as possible. Make sure it has been thoroughly tightened. Lastly, plug the Schuko plug into the wall socket.

• – 1 Schuko socket

• w 1250 mm cable

• 1B

  • MILL

• Mill a hole in the table.

• 2B

• INSERT Insert Powerdot into the hole and feed the power plug through the table and the plastic fastening nut.

• 3B

• Turn the plastic fastening nut as far up the thread as possible. Make sure it has been thoroughly tightened. Lastly, plug the Schuko plug into the wall socket. TURN CLOCKWISE & PLUGIN

• Kondator AB, Energivägen 8 – Box 121, SE-135 23 TYRESÖ, SWEDEN

• www.kondator,se

Documents / Resources

| KONDATOR 935-PM50 Built-in Power Socket [pdf] Installation Guide
935-PM50, Built-in Power Socket, Power Socket, Built-in Socket, Socket, 935-PM50 Power Socket
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>