VENTRAY DW50 Portable Dishwasher User Guide

DW50 Portable Dishwasher
User Guide

Thank you for purchasing Ventray Portable Dishwasher In this guide, we will show you how to install and operate your new dishwasher for the first time.
To avoid injury, read and understand the important safety information included before using this appliance.

PRODUCT OVERVIEW

1 Filter assembly
2 Lower spray arm
3 Main rack
4 Cutlery basket| 5 Drain hose clamp
6 Suction cup for drain hose
7 let hose
8 Drain hose
---|---

Pictures are for illustration purposes only The actual product may be different

WARNING

electrical Shook Hard

• The dishwasher MUST be grounded
• Do NO Tuscan adapter or extension cord
• Do NOT touch the power cord with wet hands

MAINTENANCE

1. Unplug the dishwasher from power outlet. Turn counter-clockwise and ft the filter assembly Rinse it under tap water and install it back
2. Clean the sprayer regularly to prevent clogging. Pull out to remove the lower spray arm. Rinse the spray arm under running water Use a thin wire to unclog the nozzles when necessary

SCAN ME

https://www.ventray.com/en-us/product-registry
WWW.VENTRAY.COM

INSTALLATION

Water rust is fed by an inlet valve.
Place the dishwasher on a flat level surface close to a water outlet and a drain.

INSTALLATION OF INLET HOSE

1. Connect the inlet hose to the net valve.
   The dishwasher may leak if not connected properly.

2. Connect the narrower end of the hose to the convenient connector. Attach the convenient connector to a standard water tap or hose.
   The convenient connector may not fit all faucets. You may need to twist the tip-off or add an adapter to fit properly.
   INSTALLATION OF DRAIN HOSE

3. Connect the drain hose to the hose WA connector by fixing the hose clamp.
   See the illustration below for a securely connected drain hose.
   

4. Put the free end of the drain hose into the sink or drainage. Use the suction cup to mount the drain hose.
   
   Do not raise the drain hose to more  than 15inches, or war nary not be drained properly

OPERATION

1. Load the dishwasher Remove large residues from tableware before placing them onto the dishwasher rack. Lean tableware against the racking Do not pile up Place utensils in the basket provided, with sharp ends facing downwards
   

2. Add one tablespoon of dishwasher detergent powder or a small tablet below the cutlery rack
   Do not add too much detergent. The excess foam may cause an overflow

3. Press the button to power on the dishwasher.

4. Press the button to select a washing program.

5. Press the button to start washing immediately.

6. Press the button to delay the washing program.

7. Press the and buttons together for 3 seconds to start the child lock function while washing. To cancel the function, press the and buttons together for 3 seconds.

Washed dishes may be hot. Allow washed dis hos to cool down for at least 30 minutes before removing from the dishwasher

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>