DOMETIC SP950C Climate Control Coolair Instruction Manual

CLIMATE CONTROL
COOLAIR

Fastening frame for MAN TGL/TGM/TGS slim driver cab
Installation Manual
SP950C, SPX1200C

© 2021 Dometic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The trademarks mentioned in this manual belong to Dometic Sweden AB. All rights are reserved.
CoolAir SP950C, SPX1200C

Safety instructions

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com, dometic.com.

1 Safety instructions
NOTICE! Damage hazard

•  The freedom of movement of semi-trailers (of the outer edges of the semi-trailer when turning or jackknifing) and other vehicle attachments must not be restricted.
    NOTE

•  Observe the safety instructions in the installation manual for the parking cooler.

Scope of delivery

Installation kit for MAN TGL/TGM/TGS

Before installing the system, check that all the parts belonging to the scope of delivery are present.
NOTE
The components to fix the compressor unit SP950C or SPX1200C to the fastening frame are included in the compressor unit‘s scope of delivery.

The target group for this manual

3 Target group for this manual
The installation information in this manual is only intended for qualified personnel at workshops, who are familiar with the guidelines and safety precautions to be applied
during the installation of vehicle accessory parts.

 Intended use

The fastening frame is used for installing the compressor unit SP950C or SPX1200C for the parking cooler SP950 or SPX1200, respectively, to the following vehicles:
MAN TGL/TGM/TGS narrow driver cab. The fastening frame is attached on the left of the rear cab wall.
When fastening the fastening frame, use existing fastening points on the vehicle. You do not need to drill new holes.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance
will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:

• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications.

Fitting the fastening frame

5 Fitting the fastening frame
NOTICE! Damage hazard
Observe the information in the installation manual when fitting the parking cooler.
NOTE
Operating instructions can be found in the operating manual for the parking cooler.

Basic assembly is described in fig.1:

Warranty

Fit the fastening frame and the compressor unit at the MAN TGL/TGM/TGS as follows:

1. Insert and tighten the four M8 x 40 bolts, eight washers M8 8.4 x 16 mm, and four M8 self-locking nuts (fig.**1**) in the fastening frame for the compressor unit.
2. Remove the existing nuts (fig.**2 1**) from the fastening of the air intake housing.
3.  Fasten the fastening frame to the fastening bolts using the three M8 8.4 x 20 mm washers and three M8 self-locking nuts provided (fig.**2 1)**.
4.  Attach the fastening frame to the bottom of the bracket with the two M8 x 16 bolts, four U-washers M8 8.4 x 20 mm and two M8 self-locking nuts provided (fig**.2 2**).
5. Push the four washers M8 8.4 x 30 mm on the projecting bolts of the fastening frame (fig.1 1).
6. Place the compressor unit on the projecting bolts of the fastening frame and bolt to the four washers M8 8.4 x 16 mm and four M8 self-locking nuts.
7. Check that all bolts are still tight after traveling approximately 200 km.

https://documents.dometic.com/?object_id=63340

You find the following steps in the installation manual of the compressor unit SP950C/SPX1200C. documents.dometic.com/?object_id=63340

6Warranty
The statutory warranty period applies. If the product is defective, please contact the service partner in your country (see dometic.com/dealer).
Our experts will be happy to help you and will discuss the warranty process with you in more detail.

dometic.com

YOUR LOCAL
DEALER
dometic.com/dealer
YOUR LOCAL
SUPPORT
dometic.com/contact 
YOUR LOCAL
SALES OFFICE
dometics
A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUP AB Hemvarnsgatan 15 SE-17154 Solna Sweden

Documents / Resources

| DOMETIC SP950C Climate Control Coolair [pdf] Instruction Manual
SP950C, Climate Control Coolair
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>