JIMTAB M18 Pro Native 1080P Video Projector User Manual

MEDIA 18 PRO PROJECTOR
USER MANUAL
Please read this instruction thoroughly before using this product and keep it for future reference.

PACKING LIST

NOTICE

FUNCTION OVERVIEW

QUICK START

INPUT SOURCE

WIFI CONNECTION ( ANDROID )

1. Go to settings, turn on“WLAN” on your Android device
2. Connect your Android device to the WiFi projector-xxxxxx
3. Enter password:12345678
4. Turn on the wireless projection function in phone’s status bar or setting pape, search“projector-XXXX” and click it to connect
5. Click“projector-xxxxxx”on your Android device, the screen mirroring will success in seconds

WIFI CONNECTION ( IOS)

1. Turn on WLAN(WIFI) and mobile data on your phone
2. Enter your phone setting , turn on wireless projection and search“projector-xxxxxx”
3. Enter password:12345678
4. Open Control Center and tap Screen Mirroring on your IOS device. select“projector-xxxxxx” from the searching list
5. Click“projector-xxxxxx”on your IOS device, the screen mirroring will success in seconds

USE WIRED MIRRORING CONNECTION(IOS)

1. Select source as“MuItI-Screen” after power on
2. onnect projector and iphone by original USB data cable by USB 5V input.
3. Get”Trust” from iphone by the first time, enter your password , same as unlock screen password

USE WIRED MIRRORING CONNECTION(ANDROID)

1. Select source as“Multl-Screen” after power on
2. Plug original data micro-usb cable to connect.Turn on mutl-screen on your Android device settings directly
3. Choose ”projector-xxxxxx”and Start Mirroring

Finish the wired projection of Android device

HOW TO CONNECT TO YOUR OWN WIFI

Please connect to your home WiFi network to save your mobile traffic.

1. Turn on WLAN(WIFI) and mobile data on your phone
2. Enter your phone WLAN (WIFI ) setting and search “projector-xxxxxx”
3. Enter password:12345678
4. Open your phone brower and input IP ” 192.168.49.1 “, then enter WIFI AP to scan WIFI
5. CIick“Wifi AP”
6. CIick“Scan”
7. Connect your home WIFI
8. Turn on Screen Mirroring function

Choose and connect ”projector-xxxxxx” and Start Mirroring

INSTALLATION AND DEBUGGING

Adjust the image projected onto the screen

1. If the projected picture is off the screen Please aim the lens of the projector at the center of the screen.
2. If the picture is distorted
   As shown in Figure 2, please place the projector on a horizontal surface As shown in Figure 3, use the remote control to adjust by its + 50 data ladder correction function.

Precaution
When the projector is suspended from the ceiling or in a rear projection system, please change the projection direction in the settings

TRAPEZOIDAL CORRECTION FUNCTION

1. +15° manual keystone correction
2. +50° electronic keystone correction

1. Press the menu button on remote control
2. Click the function of keystone ( 1)
3. Allows auto keystone correction vertically and Horizontally ( 2)

PROJECTOR CONNECTION

PROJECTION DISTANCE&SIZE

In order to get the best projection results.Please select a throw distance higher than 2.6 meters

SPECIFICATION

720P,1080i, 1080P
Projection Distance| 1.7M-9.2M| Projection Size| 50″-300″
Focus| Manual| Aspect Ratio| 4:3/16:9/auto
Speaker| 5W4ohm| Keystone Correction| ±50°
Dimension| 308232105mm| Installation Type| Front/Rear/Ceiling
Power Supply| AC 100-240V| Weight| 2.6 KG
Video Format Supported| AVI/MP4/MKV/FLV/MOV/ RMVB/3GP/MPEG1/ MPEG2/H.264/XVID| Photo Format Supported| BMP/JPG/JPEG/PGN/GIF
Ports| HD IN2/USB1/5V Our’ VGA Port1/AV IN/ Audio Outl/SD Card Slot*1| Audio Format Supported| MP2/MP3/PCM/FLAC/WMA/AAC

TROUBLESHOOTING GUIDE

Tips:
If you find black spots on the screen during use. Please do not worry. Contact our customer service mailbox and we will provide you with a video solution.

1. No Sound
   ♦ Turn Dolby audio off in your device.
   ♦ External speaker is required for VGA cable connection.

2. Blurry Image
   ♦ Adjust focus ring/keystone.
   ♦ Projector and screen/wall must be an effective distance.

3. Remote Unresponsive
   ♦ Make sure remote points at IR receiver directly.
   ♦ Do not cover IR receiver.

4. Mobile Connection
   iOS: Genuine lightning to H DMI cable
   And roid: Micro USB to H DMI adapter/Type C to HDMI cable

5. Up Side Down Images
   Enter “Menu” on projector or remote to flip the projection image.

If you have any questions about our products and you can contact our customer support any time!

CUSTOMER SUPPORT

M18 PROJECTOR
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>