Nakamichi NAM3510-M7 AV Media Receiver User Manual

Nakamichi NAM3510-M7 AV Media Receiver

WARNING & PRECAUTION
To avoid risk of serious injury or possible violation of laws, please read the following thoroughly before installation or connecting.

• This symbol means important ban. Failure to heed them can result in serious injury or death.

• This symbol mean important instructions. Failure to heed them can result in injury or material property damage.

• Having the wiring and installation done by expert.
  The wiring and installation of this unit requires special technical skill and experience. To ensure the safety, always connect the dealer where you purchased this product to ave the work done.

• Do not wot ch v;deo o, operate the unit while driving.

• Do not ;nstoll ;n locot;on which may hide vehicle operation, such as steering wheel or gearshift or cover of airbag .

• Do not touch ontenno o, ony plugs while in thunder storm to avoid electric shock.

• Do not damage w;rtng. Failure to do so may result in electric shock or fire due to electrical shorts.

• Do not install in locations w;th ;n h;gh rno;stu,e o, dusty. Moisture or dusty that penetrate into this unit may result in product failure.

• Be sure to use specified accessory parts.

• Be sure to use the correct ampere rating when replace fuses. Failure to do so may result in fire of electric shorts.

• Be sure to disconnect the cable from the negative battery

• Be sure to connect ‘Parking Break’ lead so that the driver can not watch the video unless the vehicle is stopped. Failure to do so may result in traffic accident or violation of laws.

• Be sure to check the installation of antenna regular. Antenna dropping may result in an accident while the vehicle is running.

PRODUCT FEATURES

• 2-Din receiver with capacitive panel
• Support Carplay
• Support Android auto
• 7-inch high-brightness and wide angle screen
• Support Dual USB
• Support AHD Camera
• Built-in multi-color lights
• Built-in Bluetooth
• Support Bluetooth music playback
• Built-DSP
• Support time alignment
• Built-in 16 band EQ,Preset 9 sound effects
• Support lossless music
• Support 1080P video playback
• Support MP3/WMA/AAC/FLAC audio playback
• Support H264/WMV /DIVX/FLV video playback
• 2 Video output
• 4V Pre-output
• 3V Subwoofer output
• 4.1 Audio Channel Output
• 1 Video input,2 Audio input
• Support subwoofer output
• Support subwoofer volume control
• Built-in PAC jack
• Maximum power:4x50W
• Support external micophone
• High sensitivity FM/AM, support RDS
• Support steering wheel button learning
• Support 170x96mm and 178xl 00mm installation size

ACCESSORY LIST

1. 16PtoIS0Cable 1 pc
2.  5RCA Cable 1 pc
3.  Remote Control 1 pc
4.  Frame 1 pc
5. Half sleeve 1 pc
6. Diassemble keys 2 pcs
7. User manual 1 pc

WIRING CONNECTION

PANEL OPERATION

OPERATION & CONTROL MODES

1. TF Card interface
2. Microphone:Voice receiving position Remote control receiving window Increase volume
3. Decrease volume
4. Short press to mute/cancel mute Long press to enter/quit standby mode Main menu
5. Active Siri
6. System reset
7. USB interface

REMOTE CONTROL OPERATION

1. (!> Power On/ Off
2. Mute/ Unmute
3. Return to home page
4. Return to the main interface Switch the source module
5. Radio – Manual tuning (forward) Radio – Manual tuning (reverse) Short Press:
6. Radio – Switch to the previous preset USB/SD/Bluetooth – Previous track Long Press:
7. Radio – Automatic seek (reverse) USB/SD/Bluetooth – Fast reverse

Short Press:
Radio – Switch to the next preset USB/SD/Bluetooth – next track
Long Press:
Radio – Automatic seek (forward) USB/SD/Bluetooth – Fast forward USB/SD/Bluetooth – Play or Pause Radio Switch between long range DX or short range LOC Bluetooth interface.Call back function Switch between FM and AM bands Reduce volume

HOME PAGE OPERATION

The first time power on,Please select:

1. Select the language
2. Select the country
3. Click [ ✓l to enter the main menu,Display as below:

• Home
• Setting
• Page down
• screen saver
• Raido
• Carplay/Androi Auto
• Bluetooth phone I!! USB playback
• Bluetooth music
• lfl Aux input
• TF card playback
• DSP Setting

Remark:
About Carplay/Android auto, Shows the relevant interface based on your connected device.

RADIO OPERATION

Radio Interface

• Backward
•  Forward
• Band selection 111 DSP setting
• Q Automatic search
• DX/LOC switch
• Frequency input

Radio Area Selection

1.  Press[□] to enter the homepage.
2. Click [@] to enter setting interface.
3. Click [General] to select [ Radio Area].
4. Select the corresponding radio area.

Automatic Search

Press and hold the [Q]for more than 2 seconds,the radio stations that have been searched will be automatically saved the number list below.

Rds Function

1.  Press to enter the homepage.
2. Click [@] to enter setting interface.
3. Click [General] to select [RDS].
4. Click RDS to ON:

BLUETOOTH OPERATION

Bluetooth Pairing

The first time pair mobile phone with AV receiver, please follow below steps:

1. Press [ D] to enter the homepage.
2. Click [Phone] to enter the Bluetooth interface.
3. Turn on the phone’s Bluetooth to search: Bluetooth device: NAM3510-M7.
4. Click NAM351 0-M7 to pair.

Call Interface

• Calls record
• Phone book
• Setup
•  Answer
• Backspace
• Incoming call
• Called
• Missed call
• Delete

MULTIMEDIA OPERATION

Music Playback

1. Press [ D] to enter the homepage.
2. Click [USB] or [Card] to enter the playback interface.

• Playlist
• Previous track III
• Play/Pause  Repeat playback
• ES Random playback
• WDSP settings
• Video Playback
• ext track
• Play selection
• Next page

1. . Press  to enter the homepage.
2. Click [USB] or [Card] to enter the playback interface.
3. Click [List] ,Select [@],Click on the video to play.

• D Playlist
• Previous video III
• Play/Pause
• Repeat playback
• ES Random playback
• settings 13111
• Brightness and contrast adjustment t>
• Next page
• Next video
• Play selection

Bluetooth Music Playback

1. Pressto enter the homepage.
2. Click [ BT MUSIC] to enter the bluetooth

CARPLAY OPERATION

Connect iPhone to enter the Apple Carp lay interface

ANDROID AUTO OPERATION
Connect android Phone to enter the android interface

AUX

1. Press to enter the homepage.
2. Click to enter the playback interface.

DSP OPERATION

Balance setting

1. .Press [ □]to enter the homepage.
2. Click [DSP] to enter the DSP Settings.
3. Click [Balance] to enter the balance settings.

EQ Settings

1. .Press [ □]to enter the homepage.
2. Click [DSP] to enter the DSP Settings.
3. Click [ EQ] to enter the EQ settings.

Surroud Settings

1. Press [ □]to enter the homepage.
2. Click [DSP] to enter the DSP Settings.
3. Click [Balance] to enter the balance settings.

TIME SETTINGS

1.  Press [ □] to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [Time] to enter the year, month, day and time setting.

GENERAL SETTINGS

Language Settings

1. Press [ □]to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ General] to enter the general setting.
4. Click[Language] to enter the lang­uage settings.

Front And Rear Microphone Settings

1. Press [ □]to enter the homepage.
2. 3. Click [@]to enter the setting interface.
3. Click [ General] to enter the general setting.
4. Click [MIC Switch] to select For R.
   F: Front microphone
   R: Rear microphone

Steering Wheel Learning

1. Press [ □] to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ General] to select [ SWC], to enter the steering wheel learning.
4. Click on the function that needs to be learned on the screen.
5. Press the button needed for the car steering wheel.
6. Click to [Save].

Key lights

1. Press [ □]to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ General] to enter the general setting.
4. Click [Seven Colur Light] to enter the key lights settings.

SOUND SETTINGS

Reversing Volume Adjustment

1. Press [ □] to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ Sound] to enter the sound setting.
4. Click the [ ◄ ] [ ►] of the reverse vol item to adjustment.

Subwoofer setting

1. Press [ □] to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ Sound] to enter the sound setting.
4. Click [ Subwoofer] to enter the sub-woofer settings. ON OFF EIII

Volume Control Settings

1. Press [ □] to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ Sound] to enter the sound setting.
4. Click[Volume Control] to enter the vol-ume settings.

WALLPAPER REPLACEMENT

1. Press [ □ ]to enter the homepage.
2. Click [@]to enter the setting interface.
3. Click [ Wallpaper] to enter the wallpaper replacement.
4.  Select the wallpaper that needs to be replaced.
5. Click [ ✓ ],confirm to set wallpapers.

COMMON TROUBLE-SHOOTING

Can not power on

| Check fuse| Change fuse same as the old one
Some factors cause MPU wrong operation| Press RES button on the panel by penpoint, then, power on
After ignition switch off, setting information all lose| ****

Change battery or fuse

| ****

Reset information and save

Poor performance of radio station| ****

Weak signal

| Move the car to another plac e, then research
Can not switch language/subtitle| There is only one language/ subtitle in disc| If   disc  is  not    with  multilanguage/ sub title , it cannot switch language/ subtitle

PRECAUTIONS ON POWER SUPPLY AND SPEAKER CONNECTIONS:

• Do not connect the speaker leads of the power cord to the car battery otherwise, the unit will be seriously damaged.
• BEFORE connecting the speaker leads of the powet cord to the speakers, check the speaker wiring in your car.

SPECIFICATION

• Operation Voltage: 14.4V ( 10.5-16V)
• Product Size: 178xl OOxl 28mm
• Panel Installation Size: 178 x 100mm 170 x 96mm
• Operationg temperature: -10 °C- +60 ‘C
• Storage Temperature: -20 C- +70 C Net Weight:900g

TFT Screen Item

• Size: 7″ Display Resolution: 800 x 480 Contrast ratio:500 Brightness:SOOnit
• Bluetooth Communication System: BT4.0+EDR Frequency Band: 2.4GHz Max Range: Sm
• Audio Max Power: 4x50w Front Output(V): 4V /1 OKO Pre-output impedance: :s;6000 Speakers impedance: 4-80
• Video External Video Input System: NTSC/PAL/SECAM External Video Input: 1 VP-P /750
• Video Format H264/ MP4/ A YI/ MKV / FLY Audio Format MP3/ APE/ AAC/FLAC
• USB Interface USB: Readable/ Chargeable (5±0.25V /1 A)
• Radio FM Frequency: 87.5-108.0MHZ AM Frequency: 522-1620KHZ

SCAN OUR QR CODE OR VISIT WWW.NAKAMICHICARAUDIO.COM FOR COMPLETE AUDIO SETTINGS INSTRUCTIONS 11 nakamichi.global @l nakamichi.caraudio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>