OPAKALL E-91 Portable Wireless Sports Speakers User Manual

OPAKALL E-91 Portable Wireless Sports Speakers

SPECIFICATION

• Effective distance: 10m
• Output power: 5Wx2
• Charge voltage: DC SV
• Frequency response : 100Hz – 20KHz
• Signal-To-Noise ratio SNR: >70dB
• Audio Input: Bluetooth, TF cards, LINE, USB
• Speaker unit: 40

Feature

• Hands-free call
• Chinese prompt voice
• TF card, USB disk playback, support Mp3 and other
• audio source formats
• Micro USB charging interface

Operational Instruction

1. Switch On / Off
   Boot: dial “ON”
   Shut down: dial to “OFF”

2. Bluetooth connection
   a. Search by cell phone or other device after entering Blue tooth mode conduct “E-91” pairing connection, if you need to enter a pairing code of “0000”, after the pairing is successful, enter Blue tooth playback mode.
   b. After the device pairing is successful, the next time it enters Blue tooth mode, it will automatically return to 105, and the backlink timeout will enter the pairing state.

3. Bluetooth call
   When you receive a call, press key Answer, Long press refuse, Talking process short Press hang up.

4. TF cards, USS disks
   Insert TF card into TF card slot to automatically switch to card reading mode
   Inserting a USS socket autom的cally switches to card reading mode

5. Audio Input
   Will be 3. One end of the 5mm stereo audio cable plug is connected to the Blue tooth speaker AUX port, and the other end is linked to the 3.5mm audio output of multi med旧 audio source playback devices such as mobile/MP3/PC. The Bluetooth speaker automatically switches to line mode.

6. Charging
   Connect micro charging cable USS plug to USS cha「ging port with DC =SV, micro The charging head is connected to the machine今 Plug in, You can charge and charge the red indicator light

Trouble Shooting

1. The device is often automatically turned off after a long period of playing
   The battery may not have enough power. please charge and try again

2. Bluetooth, music appears, Caden
   Whether it is beyond the effective connection distance of the speaker, or if there is an obstacle between the speaker and the Blue tooth, device.

3. Matching failed
   a. Check that the speaker is in search or reboot
   b. There are too many Blue tooth devices around, making it difficult to search and turning off other Blue tooth devices.

Notice

1. Please store and use this product at room temperature,
2. Do not expose this product to rain or wet conditions;
3. Do not drop, to avoid the fall of the product damage;
4. Do not dismantle and repair the product;
5. The product is built一in a lithium battery, do not casually discard or put in the fire, so as not to cause danger!

Packing List

• Bluetooth Speaker 1 post
• 3.SmmAudio Line 1
• Instruction 1 item
• micro Charging wires 1

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates uses and can radiate radio frequency energy and,  if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received,  including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>