CELESTRON 72336 12×50 Nature DX Binoculars User Guide
- June 6, 2024
- Celestron
Table of Contents
CELESTRON 72336 12×50 Nature DX Binoculars
QUICK SETUP GUIDE
For more information on this product or to download the complete instruction
manual, please visit the Nature DX product page on celestron.com Thank you for
purchasing Celestron binoculars. We hope they bring you many years of
enjoyment. Please read these
instructions before using your new binoculars.
Overview
- A. Eyepiece
- B. Diopter adjustment
- C. Focuser
- D. Objective lens
- E. Tripod adapter thread
- F. Rubber eyecup
Adjusting the Interpupillary Distance (IPD)
Using both hands, lift the binoculars up to your eyes and look through them at an object in the distance. Move the two halves of the binoculars about the hinge until you see one clear circle of image through both eyes.
Adjusting the Diopter
- Close your right eye and look through the left side of the binoculars with your left eye. Rotate the center focusing wheel until the image appears in sharp focus.
- Close your left eye and look through the right eyepiece (called the diopter). Rotate the right eyepiece until the image appears in sharp focus.
- Now look through both eyepieces with both eyes open. Since you’ve already adjusted the right eyepiece, use only the center focusing wheel to refocus on a new object at a different distance.
For complete specifications and warranty information, visit:
celestron.com/support/warranties
© 2022 Celestron • All rights reserved
celestron.com/pages/technical-support01-22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>