Fte maximal Fte-WB2-11-LK Charging Station User Guide
- June 6, 2024
- Fte maximal
Table of Contents
Fte maximal Fte-WB2-11-LK Charging Station User Guide
The installation and repair may only be carried out by a qualitfied electrician.
Wallbox Overview
Accessories of WB2-11-LK
Wallbox WB2-11-LK Overview
Technical Parameters
Level 2 EV Wallbox WB2-11-LK
Model: With charging cable and type 2 charging plug
Power connection: 3 phase current (3P + N + PE)
Mains voltage AC 230/400 V ± 10%, 50/60 Hz
Output rating (max.): 11 kW
Output current (max): 16 A per phase
Residual current device with direct current detection: 30 mA AC + 6 mA DC
Operating temperature range: – 25°C ～ 55°C
Operating humidity range: IP 0 – 95 %
protection class: IP 66
Certificates and approval: IEC 62752 und IEC61851, CE, (EMC und LVD), RoHS
Installation type: Wall or stand installation (Stand is optional) Start
Charge start: Start button on the wallbox
Warranty: 2 years
Instruction for Use
Hang the cable on the hook when it is not in use
Installation Guide
Wallbox Overview
Accessories of Wallbox WB2-11-LS
Wallbox WB2-11-LS Overview
Technical Parameters
Level 2 EV Wallbox WB2-11-LS
Model: With charging socket type 2
Power connection: 3 phase current (3P + N + PE)
Mains voltage AC 230/400 V ± 10%, 50/60 Hz
Output rating (max.): 11 kW
Output current (max): 16 A per phase
Residual current device with direct current detection: 30 mA AC + 6 mA DC
Operating temperature – 25°C ～ 55°C
range: Operating humidity 0 – 95 %
range: IP protection class: IP 66
Certificates and approval: IEC 62752 und IEC61851, CE, (EMC und LVD), RoHS
Installation type: Wall or stand installation (Stand is optional) Start
Charge start: button on the wallbox
Warranty: 2 years
Instruction for use
Hang the cable on the hook when it is not in use
Installation Guide
Illustration of Screen and LED
THREE PHASE
- Real-time power
- Three live wire data
- Charging time
- Power consumption
- Charging power
- Wallbox temperatur
- Emergency stop
- Over current
- Over cemperature
- Leakage protection
- Short circuit
Note:
When minor problems like short circuit occor, the wallbox will automatically
restart. During the restart the box will try to solve the minior problem and
to continue to charge.
In case of major failures, the wallbox will not be able to recover and restart again. Once the user pulls out the charging plug, the wallbox will automatically count down 10 seconds and restart afterwards. In this case, an electrician must perform troubleshooting.
Security Warning
To avoid damage or injury, be sure to observe all safety instructions, warnings and notes marked with the – symbol must be observed!
The user must have read these instructions including all safety instructions and warnings. The user must have read and understood this manual including all safety instructions. Should the user fail to observe and comply with the operating, care and safety instructions in this manual and on the wallbox, it may result in malfunction, electric shock, fire and/or serious injury to the user and damage to either the vehicle or the wallbox.
Any damage caused by failure to follow the instructions is excluded from the warranty. The wallbox has been designed and manufactured in accordance with the established directives of the European Union and complies with all required requirements, safety regulations and standards.
- This product must be installed, repaired or maintained only by authorized electricians and in accordance with national electrical installation codes. All applicable local, regional and national regulations for electrical installations must be observed.
- Before use, regularly check the wallbox and charging cable for damage, there is a risk of electric shock when operating a defective charging station.
- DO NOT use the wallbox if the device is damaged and DO NOT attempt to repair any parts of the charging station yourself! There is a risk of electric shock.
- Ensure that all safety devices are available and operational at all times. The charging station must not be used in flammable environments, such as environments with volatile gas.
- Unauthorized modifications or conversions are not permitted. NEVER open the wallbox.
- Ensure that the wallbox is only operated in permissible ambient temperatures , altitudes and humiditye.
- NEVER allow children to handle the wallbox.
Maintenance & Cleaning
Our AC charging stations are subject to strict quality control. Nevertheless, if any malfunction or problem occurs within two years from the day of purchase, you can report it to the dealer and we will provide free repair during this period.
Any direct damage or malfunction caused by neglect, incorrect operation or handling, installation or repair by the user or external influences are not covered by the warranty.
The wallboxes are largely maintenance-free, but this does not release the user from regularly checking the wallbox, the charging cable and the charging plugs for any damage.
The user should avoid any shocks to the wallbox, however, if the wallbox is subject to a shock, the wallbox should be checked for damage
Never clean the wallbox and cables with acids, alkalis.
Never expose the wallbox to corrosive and explosive gases and protect the device as far as possible from snow, wind and sand
Updates of Software and manuals
Your wallbox and the EVSE App may get SW updates and upgrades.
Please check the following link on frequent bases for updates of manuals and other documents: https://www.ids- igital.de/de/marken/products/category-112/kfwfoerderfaehige-11-kw-ev- ladestation-wallbox.html.
DECLARATION OF CONFORMITY
Wallbox with type 2 charging socket:
Product: Fte-WB2-11-LS, Wallbox 11kW-with type 2 charging socket Fte
Brand: maximal
Art.-no: 0020002
EAN: 4260105915029
Wallbox with charging cabel and type 2 charging plug
Product: Fte-WB2-11-LK, Wallbox 11kW with charging cable and type 2 charging
plug Fte
Brand: maximal
Art.-no: 0020003
EAN: 4260105915036
Hereby, Intelligent Digital Services GmbH declares that the radio system type “Fte-WB2-11-LSWallbox 11kW-with type 2 charging socket and Fte- B2-11-LK- Wallbox 11kW-with 6 m charging cable and type 2 charging plug” is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following web address:
Link for the Fte-WB2-11-LS
https://www.ids-digital.de/content_ids/1_fte_maximal/products/
echarge/0020002/0020002__CE_Konformitaet.pdf
Link for the Fte-WB2-11-LS
https://www.ids-digital.de/content_ids/1_fte_maximal/products/
echarge/0020003/0020003__CE_Konformitaet.pdf
Address of the manufacturer / distributor:
Intelligent Digital Services GmbH
Maria-Goeppert-Straße 5
23562 Lübeck, Germany
Commercial register entry: Lübeck Local Court HRB 12799
WEEE-reg.-no.: DE45546666
Important information for the proper disposal of the product in accordance
with Directive 2012/19/EU. At the end of its service life, the product must
not be disposed of as municipal waste.
It must be taken to a collection point for hazardous waste or to a dealer
offering this service.