Shenzhen Keshilian Electronic Technology KT1002 1527 Remote Control User Manual
- June 6, 2024
- Shenzhen Keshilian Electronic Technology
Table of Contents
Shenzhen Keshilian Electronic Technology KT1002 1527 Remote Control
Specifications
- Voltage：DC 12V
- Current：≤12mA
- Frequency：433MHz
- Transmit power：≥10mW
- Reference distance：500m
- Frequency deviation：±0.2MHz
- Transmission rate:50–60KHZ
- Size：924112mm
- Code：1527
- Battery：12V23A*1PCS
Each remote control has an independent address code, so the remote control is a separate entity, and will not cause mutual interference.
Application
Anti-theft alarms for homes and shopping malls; alarms for electric vehicles, automobiles, motorcycles, various door and window controllers and other industrial controllers (need to support 1527 encoding format).
Instructions
Press the remote control button, the remote control LED lights up, and the signal is transmitted successfully
Precautions
- When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).
- When using wireless electronic products, pay attention to avoiding metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, so as to avoid the short distance between the remote control and the reception or the failure of normal operation.
- Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction