Electronic Precepts NET-50 Social Distancing Device User Manual
- June 6, 2024
- Electronic Precepts
Table of Contents
Electronic Precepts NET-50 Social Distancing Device
Product Overview
A wearable solution to help maintains Social Distancing. In order to avoid physical or nearby contact with the next person and keep the required distance to minimize the chances of getting Covid infection. NET-50 is a wearable device with multiple indications for alerting its user to maintain the required Social distance.
Device Setup
- Power on the device by Pressing the Top of the Plastic Puck for 3 seconds, Green LED will Flash and Unit will be Powered up.
- Use accompany App to Scan the QR code to Pair the Device to the Mobile Phone.
- Wear the device on the right arm.
Mechanical Specifications
Dimensions & Weight
- Strap Length 260 mm (10.23 in)
- Case Length 45.6mm (1.79 in)
- Case Width 40 mm (1.57 in)
- Case Height 14.2 mm (0.55 in)
- Weight
Casing
- Strap Material Silicon
- Case Material ABS
- Colors White and Black
- Protection IP-67
- Mounting Hook Pin to hold the Strap around Wrist
- Antibacterial Surface No
Environmental Requirements
- Operational Temperature
- Humidity (non-condensing)
Electrical Specifications
Microcontroller & Connectivity
- Microcontroller & Bluetooth ANNA-B112
- Processor ARM Cortex-M4F with Bluetooth 5.2
- Memory 64Mbit Flash with 64KB RAM
Battery & Power
- Battery Yes
- Type Rechargeable
- Average Sleep Current Yes
- Battery Life 3 Months
Sensors
- IMU Sensor
Indicators
- RGB LED, Vibration Motor with Haptic Feedback, Audio Buzzer
Other Specifications
- Modes Auto Sleep when not in use
- Certificates FCC-ID ANNAB112 XPYANNAB1
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.