wilfa KW-60 Splash Kitchen Scale Instruction Manual
- June 6, 2024
- Wilfa
Table of Contents
Wilfa SPLASH
KITCHEN SCALE KW-60
IMPORTANT SAFETY INSTRUCTIONS
- Always place the object to be weight at the center of the kitchen scale.
- Do not place any object on top of the scale before switching the appliance on.
- Remove the batteries if the scale is not being used for a long period.
- Rinse the scale underwater and clean the scale with a slightly damp cloth. Do not use chemical/ abrasive cleaning agents.
- Never immerse the appliance in water or any other liquid.
- Keep the scale in a cool dry area.
GENERAL INSTRUCTIONS
Wilfa KW-60 is a kitchen scale designed for measuring the weight of different objects and is extra suitable for weighing various types of food and ingredients due to its easy to clean rubberlike coating. The design allows the appliance to easily be cleaned under a water faucet. The grade of waterproof is IPX7.
PRODUCT OVERVIEW
1. Unit button
2. LED Display
3. ON/OFF/TARE Button| 4. Battery Compartment Cover
5. Waterproof silicon
6. Battery Compartment
---|---
FUNCTION DESCRIPTION
- ON/OFF/TARE Button -Press the ON/OFF/TARE button to switch the scale on. Press and hold the Press the ON/OFF/TARE button for 2s to switch the scale off. Press the ON/OFF/TARE button to reset the display to zero.
- Unit Button – Press the UNIT button to select your desired weigh unit.
Symbol | Explanation |
---|---|
TARE | Tare function |
ML | Volume unit (milliliter) |
FI.OZ | A volume unit (Fluid Ounce) |
Ib | Weight unit (Pound) |
g | Weight Unit (Gram) |
oz | Weight Unit (Ounce) |
Negative value |
INSERT BATTERIES
- Use the screwdriver to unscrew the battery compartment cover
- Insert the batteries (3X 1,5V AAA) into the battery compartment according to the indications for polarity (+-) located on the inside of the compartment.
- Close the battery compartment cover with firm pressure, and use a screwdriver again to tighten the screws.
• The LED display will light up if batteries have been placed correctly.
CHANGE WEIGHT UNIT
In weighing mode, press the UNIT button to select your desired unit (g, fl.
oz, lb, oz, ml). The units will be displayed in the LED display. (The default
unit is g).
NOTE: After you have selected your desired weight unit, you may start the weighing. If there is no operation, the scale will switch off automatically in about 2 minutes. Or you can press and hold the ON/OFF/TARE button for about 2s to switch the scale off.
WEIGHT SETTINGS
- Place the scale on a solid level and flat surface to weigh.
- Do not place any objects on the scale.
- Press the ON/OFF/TARE button lightly to go to weight mode.
- Start weight objects when the LED display shows “0”
- Place the item you wish to weigh onto the scale, the display will show the weight.
MEASURING WITH TARE FUNCTION
TARE function allows you to weigh different items consecutively without
removing the items from the scale.
-
When the scale is off, press the ON/OFF/TARE button to enter the weighing mode. Start to weigh when “0” is shown on the LED.
-
Place the first item you wish to weigh onto the scale, the LED will show the weight of the first item.
-
Press the ON/OFF/TARE button to reset the display to zero. NOTE: If the weight is less than 600g, the “TARE” icon will not appear on the display by pressing the ON/OFF/ TARE button.
-
Now add another item to weigh onto the scale. The LED will show the weight of the newly added item.
-
If you remove the item added to the scale, the LED will again show zero. But if you remove all items from the scale, the LED will show a negative value.
-
When it shows the negative value, press the ON/OFF/TARE button again, it will clear to zero.
-
If there is no operation, the scale will switch off automatically in about 1 minute. Or you can press and hold the ON/OFF/TARE button for about 2s to switch the scale off.
CLEANING
1. Rinse the scale underwater and clean the scale with a slightly damp cloth
and set it to dry.
2. Do not use chemical/abrasive cleaning agents.
TROUBLESHOOTING
Problem | Possible reasons | Solutions |
---|---|---|
The LED display is dim or displays Lo | The power is not enough | Please replace |
with 3xAAA new batteries
The device is not starting when the| The battery level is too low.| Please
replace with 3xAAA new batteries
TARE button is pressed| The batteries are not inserted correctly| Please
insert the batteries according to the instructions.
The LED display shows “333 ”| Overload| Please remove the weight on the scale
to protect the weight cells. Buy a new scale with a higher weight range.
The LED displays “oue2 “| The objects, which weigh over 1000g, are
placed on the scale before it is switched on.| Remove the objects from the
scale, wait until it displays zero, then you can start weighing.
The measurement is not accurate/ LED displays “ue5e “| The weight is unstable
when you turn on the scale.| Keep the weight stable when you turn on the
scale.
INSTRUCTION MANUAL · SPLASH
GUARANTEE
Wilfa issues a 5-year guarantee on this product from the day of purchase is
done. The guarantee covers production failure or defects that arise during the
guarantee period. Your purchase receipt works as proof towards the retailer if
claiming your guarantee.
The guarantee is valid only for products that are bought and used in private
households. The guarantee is not valid if the product is used commercially.
The guarantee is not valid if the product is misused, used by negligence, if
not following instructions given by Wilfa, if modified or if unauthorized
reparation is done. The guarantee is also not valid for normal wear of the
product, misuse, lack of maintenance, use of wrong electrical voltage or:
- Overloading of product
- Coating
- Parts you can expect be replaced regularly (e.g. filter, battery etc.)
PRODUCT SPECIFICATIONS
3 x AAA (1.5 V)
SUPPORT AND SPARE PARTS
For support please visit us at wilfa.com, and see our customer service/support
page. Here you will find frequently asked questions, spare parts, tips and
tricks, and all our contact information.
RECYCLABILITY
This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling free of charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>