TAG-N-TRAC FTL1 Flex Temp Logger User Manual
- June 6, 2024
- TAG-N-TRAC
Table of Contents
TAG-N-TRAC FTL1 Flex Temp Logger
Notice
Tag-N-Trac reserves the right to make changes to any products or software
described herein and reserves the right to revise this document from time to
time in content herein with no obligation to notify any person of revisions or
changes. The information contained within this document is believed to be
reliable; however, Tag-N-Trac assumes no liability resulting from any
inaccuracies or omissions in this document, or from use of the information
obtained herein. Totum does not assume any liability arising out of the
application or use of any product, software, or circuit described herein;
neither does it convey license under its patent rights or the rights of
others.
Copyrights and Trademarks
This document and the Tag-N-Trac products described in this document may include or describe copyrighted Tag-N-Trac material, such as computer programs stored in semiconductor memories or other media., Any copyrighted material of Tag-N-Trac and its licensors contained herein, or in the Tag-N-Trac products described in this document, may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Tag-N-Trac. Furthermore, the purchase of Tag-N-Trac products shall not be deemed to grant, either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Tag-N-Trac, as arises by operation of law in the sale of a product. Any use of Tag-N-Trac’s trademarks must be approved in writing by an authorized Tag-N-Trac executive or legal representative.
FTL1 Overview
The FTL1 is a flexible and compact high accuracy temperature logger.
FTL1 Highlights:
- 7500x temperature readings
- Bluetooth 5.x support
- LED Alert function
- User configurable temperature interval
- 1 year battery life operation
- Encryption support
Operational Use
The device will be activated once the “Pull tab” is removed. Once the device
is activated, it will begin operation and log temperature at a default
interval of 15min which user can adjust. Once the device is logging, the user
can extract the data via a Phone app or a Bluetooth gateway and view the
temperature recordings via cloud portal. 
LEDs
The following details the LED lights on the FTL1.
- The FTL1 has a total of 2 LEDs.
- Green- Used to indicate activity and mode of logging event.
- Red- Used to indicate temperature excursion event has occurred.
Button
The button is used to provide user inputs and change the device
mode.
Regulatory
Note: For complete regulatory information, please contact your Tag-N-Trac representative and request any additional information.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: The grantee is not responsible for any changes or modifications
not expressly approved by the party responsible for compliance. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Product Labeling
Copyrights and Confidentiality
© Copyright 2022 Tag-N-Trac, Inc. All Rights Reserved. Any information
furnished by Tag-N-Trac and its’ affiliates is believed to be accurate and
reliable. All specifications are subject to change without notice.