emerio FH-125938.1 3-In-1 Home Climate Controller Instruction Manual

: June 6, 2024
: emerio

Table of Contents

SAFETY INSTRUCTIONS
PARTS DESCRIPTION
LOCATION
FILTER REPLACEMENT
SAFETY SYSTEM
CLEANING AND MAINTENANCE
TECHNICAL DATA
GUARANTEE AND CUSTOMER SERVICE
ENVIRONMENT FRIENDLY DISPOSAL
ERP information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

emerio FH-125938.1 3-In-1 Home Climate Controller Instruction Manual

SAFETY INSTRUCTIONS

Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual.

In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
WARNING — This appliance contains a UV emitter. Do not stare at the light source.
WARNING: In order to avoid overheating, do not cover the appliance.
The appliance must not be located immediately below a socket outlet.
Do not use this appliance in the immediate surroundings of a bath, a shower or a swimming pool.
WARNING: This appliance is not equipped with a device to control the room temperature. Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
Means “DO NOT COVER”.
Do not use this appliance if it has been dropped.
Do not use if there are visible signs of damage to the appliance.
Use this appliance on a horizontal and stable surface.
Before inserting the plug into the mains socket, please check that the voltage and frequency comply with the specifications on the rating label.
Disconnect the mains plug from the socket when the appliance is not in use and before cleaning.
Ensure that the mains cable is not hung over sharp edges and keep it away from hot objects and open flames.
Do not immerse the appliance or the mains plug in water or other liquids. There is danger to life due to electric shock!
To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
Do not plug or unplug the appliance from the electrical outlet with a wet hand.
Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause electric shock.
Never leave the appliance unattended during use.
This appliance is not designed for commercial use.
Do not use the appliance for other than intended use.
Do not wind the cord around the appliance and do not bend it.
Do not place any objects on the air inlet or outlet. Make sure that the ventilation openings are free of dust, lint, hair and other obstacles that could impair the air flow.
Keep the appliance at least 1.5 meters away from the fire source or tinder, and avoid direct sunlight.
It is forbidden to replace the power switch by the method of plugging (unplugging) the power cord plug.
Do not use the appliance against the power outlet or under the power outlet. The power outlet should be placed behind the appliance when the heater function (warm mode) is in use.
Do not share the socket with other high-power appliances.
This product must be equipped with a CE-approved fixed socket that is consistent with the rated working current. Do not use a mobile multi-purpose socket.

PARTS DESCRIPTION

Air duct
Air outlet
LED display
Top cover
Air inlet
Base
Air duct
Top cover
Air inlet
Main body
Power cord

Control panel (LED display)

On/off button (can also be used to control the air volume, swing function and Wi-Fi reset)
Digital display of temperature (In cool mode, display in white; in warm mode, display in orange)
Digital display of humidity and other settings
Filter replacement alert
UV sterilization indicator light
Wi-Fi indicator light

LOCATION

Please place the appliance in a horizontal position. Please do not use the appliance in high temperature and humidity (bathroom, kitchen).
Avoid blocking the air inlet and air outlet when the product is in use. Please keep the product far away from curtains.
Do not place anything within 1 meter in front of the air outlet to ensure that the airflow would not be reduced.

OPERATION

Insert the plug into a suitable power outlet. Press the power switch to position “I“. The appliance is in standby mode.
To turn on and off:
Press the on/off button on the control panel the buzzer will beep once and the appliance will start running.
Press and hold the on/off button for about 2 seconds, the buzzer will beep twice and the appliance will stop running. Press the on/off button for about 5 seconds, the buzzer will beep three times and the appliance enters into Wi-Fi pairing (see the section “Wi-Fi control guide”).
To set the oscillation function:
Press and hold the on/off buton on the control panel for 1 second the buzzer will beep once and the appliance will start oscillating. Press and hold the on/off button for 1 second again the buzzer will beep once and the appliance will stop oscillating.

The appliance starts working in cool mode by default; it sends out the cool air. Press the on/off button on the control panel, you can adjust the air volume from 1 to 9 under cool mode. To switch to the warm mode, or use more functions, please refer to below paragraphs and operate by the control panel or smart phone (after WiFi connected)

Caution: When the appliance runs in warm mode, the air duct will become hot. Shortly after the appliance is turned off, the air duct may still be too hot to touch.

Note: The air duct angle can be adjusted. Before the adjustment, make sure the product is turned off. Hold the main body with one hand, push the air duct with another hand forward or backward in 15 degrees.

To use the remote control:

This unit has a remote control. Please use 2×1.5V AAA batteries for this remote control.
Open the battery cover at the back of the remote control. Put in 2×1.5V AAA batteries appropriately. Close back the battery cover. See the drawing below for reference.
If it is not in use for a long time, please take the batteries out of the remote control.

Note: Most functions of the appliance can only be controlled by remote control. If you have lost the remote control or if it is damaged, please contact our customer service.

The remote control should be pointed at the signal receiver on the digital display to maximize the remote control signal. Effective distance: 4M

The remote control and batteries are not toys. Please keep them out of children’s reach.

Please insert the battery correctly.

On/off button
Press the on/off button to turn on the appliance. Press the button again to turn off the appliance.
Sleep mode button
Press the sleep mode button the digital display will show “LL” and the wind speed will become minimum.
Press the button again to exit the mode. (You can also exit the mode by pressing the air volume button “+”/“-”.) Sleep mode is inactive in the warm mode.
Max mode button
Press the max mode button the digital display will show “HH” and the wind speed will become maximum.
Press the button again to exit the mode. (You can also exit the mode by pressing the air volume button “+”/“-”.) Max mode is inactive in the warm mode.
Oscillation button
Press the oscillation button to turn on the oscillation function. Press the button again to stop oscillating.
UV sterilization button
Press the UV sterilization button to turn on the UV sterilization function. The digital display will show “ ”.
The UV lamp inside the appliance will effectively kill bacteria/virus in the air. Press the button again to turn the function off. This function will automatically shut down after 1 hour.
Cool mode button
Press the cool mode button to enter the cool mode. You can adjust the air volume under this mode by the air volume button “+”/”-” (on the left side of the remote control).
Note: cool mode is the default mode when the appliance is turned on.
Air volume button
Press the button “+” on the left side of the remote control to increase the air volume. Press the button “-” on the left side of the remote control to decrease the air volume. There are 9 level settings for cool mode.
There are 4 level settings for warm mode.
Warm mode button
Press the warm mode button to enter the warm mode. The digital display will show the ambient temperature. You can adjust the air volume and the temperature under this mode.*
Note: under warm mode, max mode and sleep mode are not available.
Temperature button
Under warm mode, press the button “+”/”-” on the right side of the remote control to set the temperature between 1-30℃.
Note: buttons do not work under cool mode.
Timer button
Press the timer button to set the working time from 1 to 8 hours. A small “·” will flash on the lower right corner of the digital display to indicate the timer is under setting/operation.

The set temperature should be higher than the ambient temperature so that the warm mode function will be turned on. When the ambient temperature reaches the set temperature the warm mode function will stop. The appliance will send out a cool breeze for approx. 40 seconds and then turn into standby mode. When the ambient temperature is lower than the set temperature the warm mode function will automatically activate. Under warm mode, the default set temperature is 25℃. When the ambient temperature is below 0℃ the digital display will only show “01” instead of negative temperature value. After running over 9 hours under the warm mode, the appliance will automatically stop running. Restart by pressing the on/off button on the control panel or by using the remote control.

Note: the temperature can only be set by the remote control. The control panel does not support this operation

Possible phenomenon

This appliance may respond to the remote control of other devices.
If you use the remote control of this appliance, other devices may respond.

This is due to the overlapping frequencies of the remote control. There is no quality problem in the product itself. To avoid misuse, keep the remote control away from other electrical devices during operation.

Note:

The digital display will extinguish in approx. 20 seconds with no operations. If you want to do further operations, firstly press any button (except for the on/off button) on the remote control or the on/off button on the control panel to turn on the digital display.
The on/off button on the remote control will turn the appliance to standby mode, not complete shutdown. Please press the power switch on the main body to completely power off when this appliance is not in use. If this appliance is not in use for a long time, please unplug the power cord.

FILTER REPLACEMENT

This appliance is equipped with a purifying air filter which can purify the air.

After a total of 720 hours of operation, the filter replacement alert “ ” will light up on the LED display, indicating that the filter needs to be replaced. Follow below steps.

Lift and take off the top cover.
Lift out the old air filter.
Install the new filter into the main body of the product.
Reinstall the top cover. The magnetic lid will snap into the position automatically

After the new filter has been replaced, long press the on/off button on the remote control for 5 seconds, the alert “ ” will light off. The product will enter a new 720 hour cycle.

Wi-Fi control guide (The guide for the APP may not be updated regularly due to software version upgrade or other reasons. This instruction is used as a guide only.):

Search “Tuya smart” in App Store (for iOS) or Google play (for Android), download the application “TuyaSmart” to your phone.
Sign up or log in to your account on Tuya. Check if the WI-FI indicator light is rapidly blinking. If not, long press the on/off button on the control panel until buzzer beeps three times and the Wi-Fi indicator light rapidly blinks.
When you open the application, there is a prompt asking you to add the appliance, or you can press the “+” at right top or button “Add Device” to add your appliance. Select the “Small Home Appliances” and then the icon “Fan”. After you confirm the Wi-Fi indicator light rapidly blinks, the appliance will be found too.
Press the icon “+” to add the appliance, and you will need to enter your Wi-Fi name and password. Please use the 2.4 GHz Wi-Fi network. Note that the 5 GHz WI-Fi is not supported by this application.
The appliance will be added after a few seconds.
You can set the name for your device by pressing the pencil logo ( ) besides, and select the location of your device. Then press “Done” at the top right corner.
Now you can operate the appliance in the interface below. Press the corresponding button to set your appliance. Check the illustrations below.

a. Appliance name
b. Back to home page: press it, you can get back to the home page, on which you can simply turn on or turn off your appliance.
c. More settings: press it, you can have more settings. The option “Share Device” allows you to share the operation of the appliance to other people.
d. Mute button: press it to set the operation with or without beep sounds
e. Air volume selection bar: move the round logo on the bar to select a desired air volume. When the warm mode is selected, the warm air volume has 4 levels to adjust. When the warm mode is not selected, if none of the max mode, sleep mode and fresh mode is selected, the cool air volume has 9 levels to adjust, if any of the max mode, sleep mode and fresh mode is selected, the air volume adjustment is not supported.
f. Display of air volume level
g. Display of current room temperature
h. Set temperature
i. Temperature decreasing button (only active in warm mode)
j. Temperature increasing button (only active in warm mode)
k. On/off button: press it to turn on/off the appliance. (“off” means the standby state)
l. Oscillation button: press it to choose the function or not
m. UV sterilization button: press it to choose the function or not
n. Timer setting: press it to select the working hours
o. Max mode button: press it to choose the function or not
p. Sleep mode button: press it to choose the function or not
q. Fresh mode button: press it to choose the natural wind or not. This is a function available only by APP control, no such button on the remote control.
r. Warm mode button: press it to choose the warm mode or no

Note

For the detailed explanation of the same functions, please refer to the “Remote control” section.
To choose the max mode, sleep mode or fresh mode (only one mode can be chosen at one time), the warm mode should be cancelled first.
The button will light in green when the corresponding function is chosen.
When the network environment for the appliance has been changed, it requires to be reconfigured.
To make the appliance enter into Wi-Fi pairing mode, long press the on/off button on the control panel until buzzer beeps three times and the Wi-Fi indicator light rapidly blinks.
When the Wi-Fi indicator light rapidly blinks, the appliance is waiting to be paired. When the Wi-Fi indicator light illuminates still, the appliance has been connected to the Wi-Fi.

SAFETY SYSTEM

This appliance is equipped with an overheat protection sensor and an automatic fail-safe that cuts power to the unit if it is accidentally tipped over or overheats. If this sensor is triggered, unplug the machine and allow it to cool. Check and remove any obstructions before restarting the appliance and be sure to place it on a hard and level surface.

CLEANING AND MAINTENANCE

Unplug the appliance before cleaning and maintenance.
Please do not put the appliance on the water or splash it, which may cause damage to the machine.
Do not use banana oil, benzine, alcohol, bleach or metal objects to wipe the surface of the appliance, which may cause discoloration of the surface.
Wipe the surface with a soft, dry cloth. If especially dirty, dilute with a mild detergent and wipe with a soft cloth. Then wipe with a dry cloth.
Use a soft brush or a vacuum cleaner to clean the dust at the air inlet and outlet. Please clean it when there is less dust. Too much dust will reduce the efficiency.

TECHNICAL DATA

Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 2000W
Cool mode power: 35 W
Max. transmitting power: 20 dBm
Frequency range: 2400 ~ 2483.5 MHz

We, Emerio, declare under our sole responsibility that the product: FH-125938.1 is in conformity with the essential requirements and other relevant requirements of the RED Directive (2014/53/EU) The complete CE declaration is available at the following address: www.emerio.eu

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee: For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase

Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non- original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual, will lead to a void of warranty, if this results in consequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use if the instruction manual is not properly executed. Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance or the replacement of said parts are not covered by the warranty and are to be paid.

ENVIRONMENT FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT OPEN. DO NOT DISPOSE OR IN FIRE OR SHORT CIRCUIT.

Manufactured by: Emerio Deutschland GmbH Lerchenweg 3, 40789 Monheim am Rhein, Deutschland

ERP information

Supplier: Emerio Deutschland GmbH
Lerchenweg 3
40789 Monheim am Rhein
Deutschland

Declare that the product detailed below:

Information requirements

Model identifier(s):

output

thermostat

| [no]
Minimum output

(indicative)

continuous heat output

electricity consumption

| | | | fan assisted heat output| [no]
At nominal heat output| elmax| 0,000| kW| Type of heat output/room temperature control (select one)
At minimum heat output| elmin| 0,000| kW| single stage heat output and no room temperature control| [no]
In standby mode| elSB| 0,001| kW| Two or more manual stages, no room temperature control| [no]
| | | | with mechanic temperature control| thermostat| room| [no]
| | | | with electronic room temperature control| [yes]
| | | | electronic room temperature control plus day timer| [no]
| | | | electronic room temperature control plus week timer| [no]
| | | | Other control options (multiple selections possible)
| | | | room temperature control, with presence detection| [no]
| | | | room temperature window detection| control, with| open| [no]
| | | | with distance control option| [no]
| | | | with adaptive start control| [no]
| | | | with working time limitation| [yes]
| | | | with black bulb sensor| [no]
---|---|---|---|---|---
Contact details| Emerio Deutschland GmbH Lerchenweg 3 40789 Monheim am Rhein Deutschland

Satisfies the requirement of the Council Directives:

COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters

Regarding information for consumers on how to install, use and maintain the product, WEEE information, please check the instruction manual provided with packaging.

Information to identify the FH-125938.1 to which the information relates to [3 in 1 Home Climate Controller]

Description| Symbol| Value| Unit
Maximum fan flow rate| F| 10,18| m3/min
Fan power input| P| 24,8| W
Service value| SV| 0,41| (m3/min)/W
Standby power consumption| PSB| 0,9| W
Fan sound power level| LWA| 55,2| dB(A)
Maximum air velocity| c| 2,0| meters/sec
Measurement standard for service value| IEC 60879:2019 – Comfort fans and regulators for household and similar purposes – Methods for measuring performance
Contact details for obtaining more information| Emerio Deutschland GmbH Lerchenweg 3 40789 Monheim am Rhein Deutschland

Satisfies the requirement of the Council Directives:

COMMISSION REGULATION (EU) No 206/2012 of 6 March 2012 and Amending COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans

Regarding information for consumers on how to install, use and maintain the product, WEEE information, please check the instruction manual provided with packaging.