Joy resolve Walnut and Dark Gray Invisi Grip Wireless Charger User Guide

BORUI BR2021 LED Flood Light

HOW TO CONNECT

Centre your devive  with the wireless charger to design the induction coils and start charging

LED COMMS

The wireless charger uses the front LED to communicate when it connects disconnects or has problems connecting to your devices

PRODUCT CARE

For a long product lifespan please keep the charger out of wet humid and hot environments and avoid disassembly and taking it outside

Wood grain may vary we use 100 percent real timber for a all our charger  so each charger has a wood grain as unique as your finger print

SPECIFICATION

Wireless Charger

• FCC ID: 2AZG4-JRWIRELESSCH
• Input: DC 5V/2A,9V/2A,12V/l.5A
• Output: DC 5V/1A,DC 9V/1.1A
• Power: SW/7.5W/10W(Max) Compatible with all Qi enabled devices use-A to usec cable included
• Wall charger/plug not included
• Model: JR-CHARG-eLKWAL or JR-CHARG-WHTRUe

INSTRUCTION

When charging your device make sure your device Is compatible. If the case Is metal, remove prior to charging. If you are having issues charging, remove your phone case  Plug the use-c Into the Charging Pad and the use-A Into a
plug with a use port. Place it on a sturdy and flat surface, such as a desk or table Place the device directly onto the middle of the Charger Pad. Charging time will depend on the type of device. Your device will display the charging progress. You may remove your device from the Charger Pad at anytime during the charging process. For the benefit of your phone battery health, try not to charge to 100% ar over night, we recommend charging to around BO% to maintain good battery health.

IMPORTANT SAFETY

Failure to follow the safety instructions can lead to fire, electrical shock, personal injury or property damage or damage to this product.\

• Do not use this unit for anything other than Its Intended use.
• Keep the unit away from heat source and direct sunlight.
• Do not expose the unit to extremely high or low temperatures.
• Use the product in a location with a temperature of 32°F
• Do not handle the unit or USB cord with wet hands.
• Do not let the dust or other things accumulate on the product and USB cord
• Do not use the unit if it has been dropped or damaged in anyway.
• epairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• If you have an electrical device, such as a pacemaker, consult a physician before using this product.
• Do not place magnetic cards or similar items near this product.
• Use the specified power source and voltage.
• Do not use a voltage converter
• Make sure the wall charger is inserted all the way into the electrical outlet. When not in use, unplug the wall charger
• Place the unit on a sturdy and flat surface during charging.
• Keep the unit out of reach of children

CUSTOMER SERVICE

If you have any questions about using the Wireless Charger 10, please contact us on info@joyresolve.com 2-year limited warranty. Joy Resolve warrants the included  hardware product and accessories against defects in materials and workmanship for two years from the date of original retail purchase. Joy Resolve does not warrant against normal wear and tear, or damage caused by accident or abuse. All products and software mentioned in this document are  registered brands belonging to the relevant brand owner. Subject to errors. ©2020 Joy Resolve ltd. All rights reserved. Joy Resolve• is a registered trademark of Joy resolve ltd. All trademarks and registered trademarks are the property  o  their respective owners. Subject to changes in technical specifications.

EXC LUSIVE LIABILITY

This product has been designed and manufactured to meet International safety standards but, like any electrical mequipment, care must be taken for safety to be assured m m,Joy Resolve ltd shall under no circumstances be liable for any loss and/or damage caused by: fire; earthquake; accidental damage; intentional misuse of the product; use of the product in improper conditions; loss and/or damage

caused to the product whilst in the possession of a third m,party; any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual; any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment. Furthermo under no circumstances shall Joy Resolve ltd be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product. The information in the operation manual can be changed without prior notice. The manufacturer offers no promise or guarantee, either implicit or explicit, as to the accuracy

COMPLIANCE

FCCCGution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may nat cause harmful interference, and
2. this device must  accept any interference received, including interference that may cause undesired operation. Any Changes ar modifications not expressly approved by the party responsible far compliance could void the user’s
   authority to operate the equipment.
   Note: This equipment has been tested and found ta comply with the limits far a Class B digital device, pursuant to part 15  of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses a can radiate radia frequency energy and, if nat installed andused in accordance with the instructions, may cause harmful interference to radio communications.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>