Godox SZ200Bi Zoom Bi-Color LED Video Light Instruction Manual

Zoom Bi-Color LED Video Light
SZ200Bi Instruction Manual

Foreword

Thank you for purchasing this Godox Product!
This Zoom Bi-color LED Video Light SZ200Bi is a continuous light with multiple functions. Suitable for almost all shooting occasions e.g. live, camping, portrait shooting, makeup, video, wedding, children ph

Features:

• Freely switch LED bicolor mode and 22 situational special effects modes
• Easy to adjust color temperature, light brightness
• Combined control by smarlphone APP/2.4G wireless/DMX control
• Without noise and interference in silent mode
• Offer strong light in light burst mode
• With a colored display to clearly show the parameters
• The excellent heat dissipation system

Features:

• Freely switch LED bicolor mode and 22 situational special effects modes
• Easy to adjust color temperature, light brightness
• Combined control by smarlphone APP/2.4G wireless/DMX control
• Without noise and interference in silent mode
• Offer strong light in light burst mode
• With a colored display to clearly show the parameters
• The excellent heat dissipation system

Name of Body

1.  Body
2. LED Beads
3. Protect Cover
4. Bowens-mount
5. Accessory Locking Ring
6. Bracket Screw
7. U-type Bracket
8. Zooming knob
9. Thermovent 1
10. Thermovent
11. Power Socket
12. Power Switch
13. Menu Button
14. FX Button
15. DMX Button
16. Fan Button
17. CCT/FN Adjusting Button
18. DIM Adjusting
19. Button
20. USB Upgrade Port

LCD Panel

Menu Interface

1. CH Chanel
2. GR Group
3. 4G Wireless ID
4. Bluetooth Reset Function
5. 3 (version number)
6. MAC(Bluetooth number)

FX Interface

FX Special Effects Display from 1 to 8

CCT Interface

CCT Function Display from 2800K to 6500K

DMX Interface

DMX Channel Display (OFF/1 to 512)

Included Items

Body 1 Diffuser 1| Reflector 1| Protect Cover 1

Steel Cable 1| Clip 1| Adapter 1| Power Cable 1

LSA-18 Power Adapter Holder 1| Instruction Manual 1

Optional Accessory

The product can be used in combination with the following optional accessories so as to achieve the best photography effects:
RC-A6 Remote control, inverter, softbox, umbrella, light stand, honeycomb, beauty dish, snoot, etc.

Power Supply

Connect the LED light to the power source with an adapter and power cable. Press the power switch to turn on the LED light.

Operation

Menu Button

Press the MENU button and the LED light will enter the menu interface. In this interface, CH channel (1 to 32), GR group (A/B/C/D/E/F,0-9), ID (OFF/01 to 99), Bluetooth function (RESET) etc.

FX Button 0

Turn the CCT/FN select dial to choose the special effect modes from 1 to 8 categories. After choosing the current mode, short press the CCT/FN select dial to switch the modes from I, II and III.

22 different special effects which are divided into 8 categories according to your demands.

No.| Display| Situation| Display I| Display II| Display Ill
---|---|---|---|---|---
| | Flash| Flash| Press conference| Paparazzi
2| Lightning| Discontinuous| Frequent| Sustainable
3| Broken bulb| Discontinuous| Frequent| Sustainable
4| TV| Slow speed| Medium speed| Quick speed
5| Candle| Discontinuous| Frequent| Sustainable
6| Fire| Firewood| Campfire| Fire hazard
7| Firework| Brief| Continuous| Show
8| SOS| | |

DMX Button

Short press the DMX button to enter the setting interface. Choose DMX channels from OFF, 001 to 512. By connecting to the control center through the RJ45 port. The parameters of LED light can be controlled by the control center.

Color temperature
The LED light will auto-enter the color temperature adjustment interface. Turn the CCT/FX button to choose color temperature from 2800K to 6500K.

Brightness adjustment
In FX or CCT interface, turn the DIM select dial to adjust brightness from 0% to 100%. Press the DIM select dial once to turn off the brightness and press it again ton recover the brightness set before.
Note: when the LED light is powered on, press the DIM select dial once can turn on or off the brightness quickly in any interface.

Fan Button
Short press the fan button to control the on/off of the fan.

1. When the fan is off, the LED light will enter silent mode. There is no noise and interference in this mode and the brightness can be adjusted from 0% to 35%.
2. When the fan is on, the LED light can be set to strong light mode. The LED light’s power will up to the maximum in this mode.

Zooming Knob ****By adjusting this knob, the beam angle can be changed from 20° to 65°.

USB Upgrade Port

1. Download the new firmware into U disk from the official website http://www.godox.com.cn/Downloads.html.
2. Turn off the LED light. Insert the U disk with new firmware into the USB upgrade port.
3. Turn on the LED light, and it will automatically enter the upgrading interface.
4. The LED light will automatically back to the main interface.

Note:

1. The newest firmware must be downloaded from the official website and stored in the root directory of U disk. And there can only be one BIN document.
2. The USB port can only support the firmware upgrade functions.

Control Mode Selection

DMX Control Setting

In the NENU interface, choose DMX options to set DMX channels (OFF/001-512). Connect the LED light to DMX control panel by RJ45 port. Set them to the same channel, the LED lights can be controlled by the control panel.

2.  n means the channel of DMX.
3.  The channels of two lights cannot be overlapped.
n+1| DMV(100/255)Integer 0-100% Light Brightness| DMXT100/255) Integer 0-100% Light Brightness
n+2| DMX'(Max. Color Temperature -Min. Color Temperature) /100/255 Integer| DMX'(Total Number of Light Effect/255)
n+3| | 0-85: I 86-171: II 172-255: III

2.4G Wireless Control ****

With a 2.4G wireless system, SZ series LED video light has a remote grouping and control function. It is recommended to purchase RC-A6 remote control(optional) to achieve wireless control. Up to 16 groups of LED lights can be controlled, 32 channels, and 99 IDs are available with strong anti- interference capability.

Note:

1. Please make LED light’s channel(CH), group(GR), and ID the same as remote controls.
2. The wireless signals can only be received in the situation that the LED light is powered on.
   Press the MENU button to enter the MENU interface and turn the CCT/FN select dial:

Select CH and turn the DIM select dial to choose channels from 1 to 32.
Select GR and turn the DIM select dial to choose groups from A to E and 0 to 9. Select ID and turn the DIM select dial to choose IDs from OFF, 01 to 99.

Bluetooth Control **3.1 Bluetooth reset function: in the MENU interface, turn the CCT/FN select dial to choose RESET. Then, short press CCT/FN select dial to reset.
Note:** the APP can be used directly on the firstly installed device (smartphone or iPad). When changing to another mobile device (smartphone or iPad), the light shall be reset before the normal connection of the APP.

http://www.guteleben.com/html/dl_app/c_ble/GodoxLight/index.html
3.2 Scan the QR code to download the “Godox Light” smartphone APP(which can be used by Android and Apple systems). For more smartphone APP operations, please open the “help” in APP to gain detailed guidance.

Technical Data

Product design and specifications are subject to change without notice.

Maintenance

This product, except consumables e.g. adapter and adapter cable, is supported with a one-year warranty.
Avoid sudden impacts and the product should be dedusted regularly. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
Unauthorized service will void the warranty.
If the product had failures or was wetted, do not use it until it is repaired by professionals.
Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District I Shenzhen, China

Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
godox.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>