Dual SWC-C30 Steering Wheel Control Instruction Manual
- June 6, 2024
- Dual
Table of Contents
Steering Wheel Control(SWC) Operation
In-Home screen, press the SWC icon to enter SWC settings. It will show as below.
Description
- Saved functions
- Steering wheel input (voltage)
- Functions
- Map the function to the steering wheel control
- Save the function to the steering wheel control
- Reset to default
- High voltage steering wheel input
- Low voltage steering wheel input
Steering Wheel learning Process
Before learning, press to reset the RESET icon to remove any previous settings.
- Input a steering wheel key. The voltage will show as in description #2 above.
- Tap the ASSIGN icon as shown on description #4 above, tap #2 to select key then tap the function as shown on description #3 above to map the steering wheel key.
- Tap the CONFIRM icon as shown in description #5 above to save the settings.
SWC Connecting Wires
IMPORTANT
This unit only works with analog steering wheel controls.
Does not support any data bus system
Note. According to vehicle type, please change the IMPEDANCE setting from the GENERAL menu if the steering wheel control does not work.
Read User Manual Online (PDF format)
Loading......