Tekants XWS-CWICON-CV Wireless Charger User Manual
- June 6, 2024
- Tekants
Table of Contents
Tekants XWS-CWICON-CV Wireless Charger
Model XWS-CWICON-CV
Model Name WIRELESS CHARGER
Product Description
This product is a WIRELESS CHARGER. It can be charged wirelessly for iPhone, Samsung, Google and more (smart phones). It features functions such as over- voltage protection, over-current protection, over-temperature protection, short-circuit protection and foreign object detection. The product is widely used in offices, homes, restaurants, conference rooms outdoor, etc.
Instructions for use
- Before using, any foreign matters on the product’s work panel must be cleaned up.
- After completing the previous step, connect the power to charge the smartphone with the wireless charging function on the panel. The best charging position is in the center of the panel.
- Note: When the product is not in use, please turn off the power to avoid excessive/overheating.
| Input power | 5V/2A 9V/1.67A 12V/1.5A |
|---|---|
| output power | 15W max |
| Working distance | ≤5mm |
| Standby loss | < 0.7W |
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>