stratosfy Beacon-I Nordic Connectivity for Workforce and Service Delivery Monitoring User Manual
- June 6, 2024
- stratosfy
Table of Contents
Stratosfy Beacon-I
FCC ID : 2A3CA-STSFYBTI01 | IC : 27758-STSFYBTI01
User Manual
Version 1.0.0
2500 Solandt Road, Suite 210, Ottawa, ON K2K 3G5
Stratosfy Beacon-I is a wireless communication device that transmits Bluetooth identity messages,
Summary
The role of Stratosfy Beacon-I, as part of Stratosfy Workforce Management
solutions, is to guarantee activities are carried out at precise locations by
either registering workforce presence or unlocking location-based task lists
when workers are within the device’s communication range.
Technology Highlights
| Proprietary technology
---|---
| Bluetooth 5 ready multi-protocol radio-based device
| Location precision down to 6 ft (2 m)
| Supports iBeacon and Stratosfy Telemetry (proprietary) packets concurrently
| Fully manageable devices via Stratosfy’s Mobile Applications
Applications
Stratosfy Beacon-I devices are typically meant to be installed at different
interior areas of a location, such as lobbies, elevators, washrooms, meeting
rooms, maintenance rooms.
| Stratosfy Beacon-I devices are not waterproof devices and are not meant to
be installed in outdoor or exterior areas of a building/location.
---|---
| If your application needs outdoor service tracking please consider using
Stratosfy Beacon-IO devices.
How it works
Stratosfy Beacon-I devices interface with the Stratosfy’s mobile application
used by the workforce to certify they are in precise predefined locations
within a property while performing their duties.
The Stratosfy’s mobile app can detect Stratosfy Beacon-I devices when within
the communications range. The app then reports the presence of the service
professional and the service activities performed by the service professional
to Stratosfy’s cloud, along with precise and reliable location data and the
timestamps automated collected during the interaction between the Stratosfy
Beacon-I device and the smartphone.
Technical Specifications
Model Number : STSFY-BT-I01
RF Specifications
Standard Protocol| Bluetooth 5
Frequency band| 2.4GHz
Number of Channels| 3 Primary, 37 Secondary
Output power| 0dBm (default power upon shipping), Programmable -40dBm to
+8dBm
Modulation| GFSK
Antenna / Gain| Chip antenna, 1.1 dBi
Mode of Operation| half-duplex
Data Rates| 1 Mbit/s
Features
BLE Application Supported| iBeacon, Stratosfy Telemetry
Processor Type| 32-bit ARM Cortex-M4F @ 64MHz
Memory| 1 MB Flash
Physical
Dimensions in mm (Length x Width x Height)| 76 x 76 x 24
Mounting Method| Wall Mounted with 3M Double-Sided Adhesive (included)
Housing Material| ABS Plastic
Color| White
Weight| 38 grams
Battery
Type| 3V / 950mAh – CR2477
Lifetime (depending on utilization) 18-24 months expected, dependent upon
environmental operating conditions, device configuration, communication
frequency
Chemical and Mechanical Resistance
Water| Not Waterproof, IP61 Rating
Withstands Exposure To| UV Resistant, Impact Resistant
Thermal
Storage| 32°F to 86°F (0°C to +30°C)
Operating Temperature| 32°F to 140°F (0°C to 60°C)
Other
Standards| FCC ID: 2A3CA-STSFYBTI01
IC: 27758-STSFYBTI01
Box Size| 10 pcs.
Warranty| 1 year
Accessories
|
---|---
Replacement CR2477 batteries – 3V / 950mAh capacity coin cell CR2477
batteries| Velcro tape/3M tape – 3M Velcro hook and loop dual lock tape 1 inch
squares
|
FCC statements
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.”
“Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.”
IC Statements
“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”
Health Canada RF Exposure Warning Statement
“This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s requirement. Information can be obtained at http://www.hc-sc.gc.ca /ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-eng.php“
2500 Solandt Road, Suite 210,
Ottawa, ON K2K 3G5
For more information, contact hello@stratosfy.io
Website : www.stratosfy.io