RYTHMOS SWAP Pad Device Instructions
- June 6, 2024
- RYTHMOS
Table of Contents
RYTHMOS SWAP Pad Device
How to Use the Swap Pad
- Read the instructions on the back of the Swap Pad.
- Place the old and new wearable on the . appropriate pad, button side down.
- The LEDs will turn blue when both wearables are correctly placed. 0 Press the center button.
- The LEDs will begin flashing in an alternating pattern to indicate a swap is in progress. B The LED’s will blink green to indicate a successful swap, or red to indicate a failure.
- If they blink red, check Rhythms. It may be a false negative.
- The swap may take 1-2 minutes to complete.
FCC
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. A separation distance of 25 cm must be maintained
between this device and nearby persons.
This transmitter must not be co-located or operation in conjunction with any
other antenna or transmitter.
Maximum antenna gain of -1dBi This device complies with part 15 of the FCC
rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this devices must accept any
interference received, including interference that may cause undesired
operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>