Bowei Technology WAG­8F2W6­XS XGSPON ONT Router User Manual

WAG ­8F2W6­XS XGSPON ONT User Manual

Package Lists

Product Overview

The WAG-8F2W6-XS is an ITU-T G.984 and ITU-T G.988 compliant ONT. The ONT provides four GE ports, two POTS ports, Wi-Fi 802.11ax 2×2@2.4GHz & 802.11ax 4×4 @5GHz concurrent, one RF interface, can efficiently deliver data services, video, and voice services. Its characteristics of high bandwidth and low delay can meet the needs of high-end home users. And it supports desktop mounting or wall mounting.

Interface

Device Interface|

Description

---|---
Fiber Optical interface| 1SC/APC optical interface for fiber connection.
LAN| 4GE Ethernet interface with RJ-45 connector, Supports 10/100/1000-Base-T, half/full-duplex and flow control, auto-negotiation or manual configuration and supports MDI/MDIX auto-sensing
Phone| 2POTS interfaces with RJ-11 connector
Power| 12V Power Input Interface
1 DC Jack for power input
Antenna| 6*external antenna

Technical Specification

Item

|

Description

---|---
Dimension| 220mm×160mm×55mm(Height×Width×Depth)
Rated Voltage| 12V
Rated Current| 2A
Operation Temperature| 0ºC to 40ºC
Storage Temperature| -20ºC to 65ºC

Safety Instructions

Please read the safety instructions carefully before using the device.

1. Please keep the power adapter and cables and hands clean and dry to avoid electric shock and other dangers.
2. Please only use the standard power adapter provided in the packaging box, otherwise, the device may work abnormally or even be damaged.
3. Please don’t open the cover of the device, especially when the device is powered on. It can be dangerous to do so.
4. If do not use the device for a long time, please turn off the power.
5. If find the device is in an abnormal state, such as too hot, strange smell, or smoke, please power off the device quickly and feedback to the service provider.
6. Please keep the device away from any hot source and water.
7. Please don’t let anything cover the cooling holes of the device.
8. Observe local equipment handling regulations and protect the environment.
9. If need to clean the dust of the equipment, please cut off the power supply first and unplug the relevant connecting cable, then use a dry cloth to clean, do not use any liquid.

Connection

Connect Ethernet

If needed, connect the LAN port of WAG-8F2W6-XS to PC via standard RJ-45 Ethernet Cable. Wireless devices can use the network name (SSID) & password to connect to the Internet.

Connect Fiber Optical Cable

Connect the fiber optical port of WAG-8F2W6-XS (at the bottom of the device) to XGSPON OLT via fiber optical cable.

Connect RJ-11 cable

If needed, connect the phone port of WAG-8F2W6-XS to the wired telephone via RJ-11 cable.

Connect Power Adapter

Connect the power interface of WAG-8F2W6-XS to a power outlet via the provided power adapter (Please don’t use other specifications of power adapter), then turn on the power switch of WAG-8F2W6-XS.

LED

LED| Color| State|

Description

---|---|---|---

Power

| ****

Green

| Off| The device is powered off.
On| The device is powered on.
PON| Green| Off| The device has not started the registration process.
Flashing| The device is registering or upgrading.
On| The device has completed the registration process.
LOS| Red| Off| The received XGSPON optical power is normal.
Flashing| The received XGSPON optical power is lower than the sensitivity of the optical receiver.
Internet| Green| Off| The device has no Ethernet connection.
On| The device has connected to the Internet (the correct IP address has been obtained and the bridge link is normal).
LAN| Green| Off| The device is not powered on or no LAN connection is established.
Flashing| Data is transmitted or received through this Ethernet interface.
On| The LAN connection is established but no data is transmitted/received.
Phone| Green| Off| The device is unable to register on the soft switch/IMS.
Flashing| Voice service is being provided.
On| The device has registered on the soft switch/IMS but no voice service.
2.4GHz| Green| Off| The WI-FI interface is disabled.
Flashing| Data is being transmitted.
On| The WI-FI interface is enabled.
5GHz| Green| Off| The WI-FI interface is disabled.
| | Flashing| Data is being transmitted.
| | On| The WI-FI interface is enabled.
WPS| Green| Off| WPS is disabled.
| | Flashing| The device is performing code matching.
| | On| Code matching successful.

Buttons

This device complies with  Part  15  of the  FCC  Rules.  Operation is subject to the following two conditions:    (1)  this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B  digital device,  pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user  is encouraged to try to correct the interference by one or more of the following measures:
‐‐Reorient or relocate the receiving antenna.
‐‐Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co‐located or operated in conjunction with any other antenna or transmitter.

RF Exposure Statement
To maintain compliance with FCC’s  RF  exposure guidelines,  This equipment should be installed and operated with a minimum distance of  20cm the radiator your body. This device and its antenna(s) must not be co‐located or operated in conjunction with any other antenna or transmitter.

ISED Canada Statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference and
2. this device must accept any interference, including interference that may cause undesired operation of the device.
   Radiation Exposure: This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment.

RF Exposure Statement
To maintain compliance with IC’s RF Exposure guidelines, This equipment should be. installed and operated with a minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>