IKEA MEDELSTOR 45cm Integrated Dishwasher Instruction Manual

IKEA MEDELSTOR 45cm Integrated Dishwasher

INSTRUCTION

TIME AND TEMP

Product Description

1. Lower spray arm
2. Filters
3. Rating plate
4. Salt container
5. Rinse aid dispenser
6. Detergent dispenser
7. Lower basket
8. Upper spray arms
9. Upper basket
10. Cutlery drawer

Beam-on-Floor

Beam-on-Floor is a light displayed on the floor below the appliance door.

• When a programme starts, a white light is on and stays on for the duration of the programme.
• When the programme is completed, the white light is off.
• When the appliance has a malfunction, the white light flBshes.
• Beam-on-Floor is off when the appliance is deactivated.

Control panel

1. On/Off button / Reset button
2. Delay start button
3. Display
4. Programme buttons
5. Option buttons
6. AUTO programme button

Display

• A. Indicators
• B. Time indicator

Indicators

Programs Overview

1. This programme offers the most efficJent use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. This programme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.

Options
You can adjust the programme selection to your needs by activating options.

• Power Clean
  Power Clean improves the dishwashing results of the selected programme. The option increases the wash temperature and duration.

• Gentle / Glass
  Gentle / Glass prevents delicate load, glassware in particular, from damaging. The option prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C.

Basic settings

How to change a setting

1.  Press and hold simultaneously and( ECO ) for about 3 seconds to enter setting mode.
   • The lights: , and are on.
   • The display shows the current value of the first available setting.
2.  Press Previous or Next to select the setting. The display shows the current setting value (a digit and the dedicated letter).
3.  Press OK to enter the setting. The current setting value flashes.
4.  Press Previous or Next to change the value.
5.  Press OK to confirm the setting value.
   • The new setting value is saved.
   • The appliance returns to the basic settings list.
6. Press and hold simultaneously and ECO for about 3 seconds to exit the setting mode.

The appliance switches to the programme selection.

Auto Open
AutoOpen improves the drying results with less energy consumption. The appliance door opens automatically during the drying phase and remains ajar.

• Caution! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance.
• Caution! If children, pets or people with disabilities have access to the appliance, deactivate AutoOpen. The automatic opening of the door may pose a danger and expose possible hazards inside the appliance (such as knives, sharp objects, chemicals).

Before first use

Make sure that the current level of the water softener is adjusted to the hardness of the water supply. Use the programme Quick 30′ to remove residues from the manufacturing process.

1.  Pour 1 litre of water in the salt container.
2.  Put 1 kg of salt in the salt container. Use rough salt designed for dishwashers only.
3.  Fill the rinse aid dispenser.
4.  Open the water tap.
5.  Select the programme Quick 30′ and close the dishwasher door to start it. Do not use detergent and do not put dishes in the baskets.

Troubleshooting

If you encounter an issue with your appliance, check the “Troubleshooting” chapter in the full version of the User Manual available on:

Technical information

1.  Refer to the rating plate for other values.
2.  If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.

Link to the EU EPREL database
The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is possible to find information related to the performance of the product in the EU EPREL database using the link https://eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. Refer to the chapter “Product description”. For more detailed information about the energy label, visit www.theenergylabel.eu

References

• APPLiA Europe | The new Energy Label | Belgium
• IKEA.com Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>