Shenzhen Farylink Technology Smart Life App User Manual

Quick Guide of Using Amazon Echo To Control Smart Devices

Add device

1. Download 4NBSU-JGF”11
   http://smartapp.tuya.com/smartlife
   Please scan the QR Code, or get Smart Life downloaded from App Store or Android Market.

2. Register an account in the 4NBSU-JGF Open Smart Life into the account registration page, click on the upper right corner of the “Register”.

3. Add devices(for example, Smart Bulb)
   After login to Smart LifeAPP, click on “+” . • Smart LifeAPP supports two types of distribution network modes: EZ mode and AP mode. EZ mode is the default
   • EZ Mode: The indicator light flashes rapidly.(Two times a second)
   • AP Mode: The indicator light flash slowly
   • Select the WiFi you are using and input the password, Click “next to connect the device.

4. Rename the device
   After the device is added successfully, click the device description text to modify the device name. The name of the device is recommended to use the easy pronunciation of the English words. (Amazon Echo only supports English temporarily)

Multiple devices can be added and renamed according to the above procedures.

Enable 4NBSU-JGgkill in Alexa APP

Choose “Skills” in the options bar, and then search-Smart Life’ in the input box.
Select Smart Life in the search results, and then click “Enable Skill”.
Then input the user name and password that you had previously registered. Only support the account in the United States.

Control Smart Bulb by Voice

After the above operation is successful, you can control the bulb via Echo.
3.1. Discover devices
Firstly, you need to say to Echo: Echo(or Alexa), discover my devices. Echo will start to find the devices which is added in Smart Life APR which will take about 20 seconds, then it will tell you the result. You can also click “Discover devices” in Alexa APR then it will show the devices that were found successfully. 3.2. Control devices by voice
Attention: The name of the device must be consistent with the addition of the Smart Life app. You can also group the bulbs and give instructions to control them together.

Attention:
Echo is one of the wake-up names, which can be any of these three names(Settings): Alexa, Echo, Amazon
3.3. Support Skill list
You can control devices by instructions like these:
Alexa(or echo), turn on [bedroom light] Alexa(or echo), turn off [bedroom light] Alexa(or echo), set [bedroom light] Alexa(or echo), to 50 percent increase [bedroom light] Alexa(or echo), to 50 percent decrease [bedroom light] Alexa(or echo), to 50 percent set [smart heater] Alexa(or echo), to 34 raise [smart heater] Alexa(or echo), by 4 lower [smart heater] by 2

Bluetooth function operation instructions

1. Please connect the bulb to the power, turn on-off-on-off-on-off-on and then the bulb will flash and enter the state and network match.
2. Connect the phone to wifi and turn on the Bluetooth, ensure that the phone network is smooth
3. After opening and logging in to the “SmartLife” APP “clickthe ‘Add button, the dual-mode bulb lamp will automatically pop up the connection window, click “Connect”, after it is successful, the smart control can be realized, and the smart bulb lamp can be controlled through the mobile phone APR
4. After opening and logging in to the “SmartLife” APR clickthe “Add button, the dual-mode bulb lamp will automatically pop up the connection window, click “Connect”, after it is successful, the smart control can be realized, and the smart bulb lamp can be controlled through the mobile phone APR

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>